AutoCodes – MINI – P1328 MINI

P1328 MINI Code - Knock Sensor 2 High Input

Quick Answer

The Engine Control Module (ECM) monitors the Knock Sensor. Common causes include Faulty Knock Sensor, Knock Sensor harness is open or shorted, Knock Sensor circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P1328 MINI indicates Knock Sensor 2 High Input.
Common causes: Common causes include Faulty Knock Sensor, Knock Sensor harness is open or shorted, Knock Sensor circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,255

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 13, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1328 MINI Description

The Engine Control Module (ECM) monitors the Knock Sensor. The ECM sets the OBDII code when the Knock Sensor is not to factory specifications.

OBDII Code P1328 MINI - Knock Sensor 2 High Input - AutoCodes.com — P1328 MINI Code - Knock Sensor 2 High Input

What does this mean?

What are the Possible Causes of the DTC P1328 MINI?

Faulty Knock Sensor
Knock Sensor harness is open or shorted
Knock Sensor circuit poor electrical connection

How to Fix the DTC P1328 MINI?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1328 MINI code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1328 MINI code?

Need more information on how to fix the P1328 MINI code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1328 MINI code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.