AutoCodes – Generic – P1326

P1326 Code - Knock Sensor Detection System

Quick Answer

The Knock Sensor Detection System (KSDS) detects vibrations indicating the onset of excessive connecting rod bearing wear. Common causes include Faulty Knock Sensor, Knock Sensor harness is open or shorted, Knock Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1326 indicates Knock Sensor Detection System.
Common causes: Common causes include Faulty Knock Sensor, Knock Sensor harness is open or shorted, Knock Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 44,537

How popular is this code, among other codes? Medium

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 13, 2023

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1326 Description

The Knock Sensor Detection System (KSDS) detects vibrations indicating the onset of excessive connecting rod bearing wear. It is designed to alert the driver at an early stage of bearing wear before the occurrence of severe engine damage, including engine failure. If vibrations caused by bearing wear start to occur, the Malfunction Indicator Lamp (MIL) will blink continuously, and the vehicle will be placed in Limp Home Mode. This will reduce further damage to the engine and ensure that the vehicle occupants are not exposed to the risk of a more severe engine failure. At that time, Diagnostic Trouble Code (DTC) P1326, specific to the KSDS, will be recorded in the ECU. The vehicle can continue to be operated for a limited time in Limp Home Mode, but it will accelerate slowly and have a reduced maximum speed. Also, engine RPMs will be limited to approximately 1800-2000 RPM.

OBDII Code P1326 - Knock Sensor Detection System - AutoCodes.com — P1326 Code - Knock Sensor Detection System

What does this mean?

What are the Possible Causes of the DTC P1326?

Faulty Knock Sensor
Knock Sensor harness is open or shorted
Knock Sensor circuit poor electrical connection
Engine mechanical problem
Reprogram Engine Control Module (ECM)

How to Fix the DTC P1326?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1326 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1326 code?

Need more information on how to fix the P1326 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1326 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

P1326 Acura — Ignition Control Module Combustion Quality Input Signal
P1326 Audi — Cylinder 2 Knock Control Limit Attained
P1326 Honda — Ignition Control Module Combustion Quality Input Signal
P1326 Hyundai — Knock Sensor Detection System
P1326 Isuzu — Ignition Control Module Combustion Quality Input Signal
P1326 KIA — Knock Sensor Detection System
P1326 Volkswagen — Cylinder 2 Knock Control Limit Attained

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.