AutoCodes – Volvo – P1310 Volvo

P1310 Volvo Code - Igniter Circuit Malfunction No. 3

Quick Answer

Direct Ignition System (DIS) is a 1-cylinder ignition system that ignites one cylinder with one ignition coil. Common causes include Faulty Ignition Coil No, 3, Ignition Coil No. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1310 Volvo indicates Igniter Circuit Malfunction No. 3.
Common causes: Common causes include Faulty Ignition Coil No, 3, Ignition Coil No.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,189

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 20, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1310 Volvo Description

Direct Ignition System (DIS) is a 1-cylinder ignition system that ignites one cylinder with one ignition coil. Ignitor is integral to ignition coil. The Engine Control Module (ECM) determines ignition timing and outputs a ignition signal (IGT) for each cylinder. Based on the IGT signals, power transistors in the ignitor cut of current to primary coil in ignition coil, causing ignition coil to fire spark plug. After delivering a command to turn off primary circuit on the IGT wire, ECM monitors IGF circuit to ensure primary switching occurred.

OBDII Code P1310 Volvo - Igniter Circuit Malfunction No. 3 - AutoCodes.com — P1310 Volvo Code - Igniter Circuit Malfunction No. 3

What does this mean?

What are the Possible Causes of the DTC P1310 Volvo?

Faulty Ignition Coil No. 3
Ignition Coil No. 3 harness is open or shorted
Ignition Coil No. 3 circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P1310 Volvo?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1310 Volvo code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1310 Volvo code?

Need more information on how to fix the P1310 Volvo code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1310 Volvo code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1310 Volvo Code

1. What are the common symptoms of OBDII code P1310 in a Volvo?

Symptoms may include engine misfires, hesitation during acceleration, rough idling, and possibly a decrease in fuel efficiency.

2. What causes the OBDII code P1310 in a Volvo?

The code P1310 usually indicates a malfunction in the igniter circuit for cylinder No. 3, which can be caused by a faulty ignition coil, wiring issues, or a defective spark plug.

3. How can I diagnose the OBDII code P1310 in my Volvo?

Diagnosis typically involves inspecting the ignition coil, spark plug, and associated wiring for cylinder No. 3. Using a multimeter to check for continuity and proper voltage can help pinpoint the issue.

4. Can driving with OBDII code P1310 in a Volvo cause further damage?

Continuing to drive with code P1310 may lead to more severe engine issues over time, such as catalytic converter damage or permanent engine misfires. It's recommended to address the problem promptly.

5. How can I repair OBDII code P1310 in my Volvo?

Repairing the code P1310 involves replacing the faulty ignition coil, spark plug, or repairing any damaged wiring in the igniter circuit for cylinder No. 3.

6. Is it safe to reset the OBDII code P1310 in my Volvo without fixing the underlying issue?

While clearing the code temporarily may turn off the check engine light, it's crucial to address the root cause of the problem to prevent further damage to the engine.

7. How much does it typically cost to repair OBDII code P1310 in a Volvo?

The cost of repairing code P1310 can vary depending on the specific cause of the issue, but it may range from $100 to $300 for parts and labor.

8. Can a DIY enthusiast fix OBDII code P1310 in a Volvo?

For those with experience in automotive repairs and access to the necessary tools, fixing code P1310 as a DIY project is possible. However, if unsure, it's best to consult a professional mechanic.

9. Are there any preventive measures to avoid OBDII code P1310 in a Volvo?

Regular maintenance, such as timely spark plug replacements and ignition system checks, can help prevent issues that may trigger code P1310 in your Volvo.

10. Will OBDII code P1310 cause my Volvo to fail an emissions test?

Yes, OBDII code P1310 can trigger a check engine light, which may result in a failed emissions test. It's important to resolve the issue before undergoing emissions testing.