AutoCodes – Toyota – P1310 2000 Toyota Camry

P1310 2000 Toyota Camry Code - Igniter Circuit Malfunction No. 3

Quick Answer

Direct Ignition System (DIS) is a 1-cylinder ignition system that ignites one cylinder with one ignition coil. Common causes include Faulty Ignition Coil No, 3, Ignition Coil No. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1310 2000 Toyota Camry indicates Igniter Circuit Malfunction No. 3.
Common causes: Common causes include Faulty Ignition Coil No, 3, Ignition Coil No.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 6,109

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 09, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1310 2000 Toyota Camry Description

Direct Ignition System (DIS) is a 1-cylinder ignition system that ignites one cylinder with one ignition coil. Ignitor is integral to ignition coil. The Engine Control Module (ECM) determines ignition timing and outputs a ignition signal (IGT) for each cylinder. Based on the IGT signals, power transistors in the ignitor cut of current to primary coil in ignition coil, causing ignition coil to fire spark plug. After delivering a command to turn off primary circuit on the IGT wire, ECM monitors IGF circuit to ensure primary switching occurred.

OBDII Code P1310 2000 Toyota Camry - Igniter Circuit Malfunction No. 3 - AutoCodes.com — P1310 2000 Toyota Camry Code - Igniter Circuit Malfunction No. 3

What does this mean?

What are the Possible Causes of the DTC P1310 2000 Toyota Camry?

Faulty Ignition Coil No. 3
Ignition Coil No. 3 harness is open or shorted
Ignition Coil No. 3 circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P1310 2000 Toyota Camry?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1310 2000 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1310 2000 Toyota Camry code?

Need more information on how to fix the P1310 2000 Toyota Camry code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1310 2000 Toyota Camry code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1310 2000 Toyota Camry Code

1. What does the OBDII code P1310 on a 2000 Toyota Camry indicate?

- The P1310 code specifically points to an Igniter Circuit Malfunction No. 3 in the ignition coil of the vehicle.

2. What are common symptoms of a P1310 code in a 2000 Toyota Camry?

- Common symptoms include engine misfires, rough idling, loss of power, and difficulty starting the vehicle.

3. What are possible causes of the P1310 code in a 2000 Toyota Camry?

- Potential causes of the P1310 code include a faulty ignition coil, damaged wiring or connectors, or issues with the ignition control module.

4. How can I diagnose a P1310 code on my 2000 Toyota Camry?

- Diagnosis typically involves checking the ignition coil, inspecting wiring and connectors for damage, and using a multimeter to test the components for proper functioning.

5. Can a DIY enthusiast repair a P1310 code on a 2000 Toyota Camry?

- Depending on the skill level, DIY enthusiasts can attempt to replace the ignition coil or repair damaged wiring themselves. However, professional diagnosis may be needed for more complex issues.

6. Is it safe to drive with a P1310 code in a 2000 Toyota Camry?

- It is not recommended to drive with a P1310 code as it can lead to further damage to the vehicle and potentially unsafe driving conditions.

7. How much does it typically cost to repair a P1310 code in a 2000 Toyota Camry?

- The cost of repair can vary depending on the exact cause of the code, but it may range from $100 to $300 for parts and labor.

8. What are some preventive measures to avoid a P1310 code in a 2000 Toyota Camry?

- Regular maintenance, such as checking and replacing spark plugs, ignition components, and wiring, can help prevent issues leading to a P1310 code.

9. Are there any recalls or technical service bulletins related to the P1310 code in a 2000 Toyota Camry?

- It is advisable to check with Toyota dealerships or online resources for any recalls or technical service bulletins related to the P1310 code in your specific vehicle.

10. How long does it usually take to repair a P1310 code in a 2000 Toyota Camry?

- The repair time can vary depending on the exact cause and the availability of parts, but it typically takes a few hours to a full day for a professional technician to diagnose and fix the issue.