P130F 2018 Chevrolet Silverado Code - Ignition On/Start Voltage Signal Message Counter Incorrect
Quick Answer
Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Common causes include Faulty Ignition Switch, Ignition Switch harness is open or shorted, Ignition Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P130F 2018 Chevrolet Silverado indicates Ignition On/Start Voltage Signal Message Counter Incorrect.
- Common causes
- Common causes include Faulty Ignition Switch, Ignition Switch harness is open or shorted, Ignition Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P130F 2018 Chevrolet Silverado Description
What are the Possible Causes of the DTC P130F 2018 Chevrolet Silverado?
- Faulty Ignition Switch
- Ignition Switch harness is open or shorted
- Ignition Switch circuit poor electrical connection
How to Fix the DTC P130F 2018 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P130F 2018 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P130F 2018 Chevrolet Silverado code?
Need more information on how to fix the P130F 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P130F 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P130F 2018 Chevrolet Silverado Code
1. What does the OBDII code P130F mean on a 2018 Chevrolet Silverado?
P130F indicates an issue with the ignition on/start voltage signal message counter being incorrect, typically related to communication errors between control modules.
2. What are common symptoms of the P130F code on a Chevrolet Silverado?
Symptoms may include difficulty starting the vehicle, reduced engine performance, warning lights on the dashboard, or intermittent electrical issues.
3. What causes the P130F code to appear on a 2018 Chevrolet Silverado?
Possible causes include a faulty ignition switch, wiring or connection issues, a malfunctioning Body Control Module (BCM), or software errors in the vehicle's control modules.
4. Can a weak battery cause the P130F code?
Yes, a weak or failing battery can result in voltage irregularities, which may trigger the P130F code.
5. How do you diagnose the P130F code on a Chevrolet Silverado?
Start by checking the battery voltage, inspecting wiring and connectors for damage or corrosion, and using a scan tool to monitor the ignition voltage signal and check for additional codes.
6. Can the P130F code cause drivability issues?
Yes, this code can lead to starting problems and potentially affect the vehicle's overall performance if not addressed.
7. How is the P130F code usually fixed?
Repairs may include replacing the ignition switch, repairing damaged wiring, updating the software in the control modules, or replacing the BCM if necessary.
8. Is it safe to drive with the P130F code active?
It’s not recommended, as the code may indicate an electrical issue that could worsen over time and potentially lead to starting failure or other performance problems.
9. Will disconnecting the battery clear the P130F code?
Disconnecting the battery may temporarily clear the code, but it won’t address the underlying issue causing it.
10. How much does it cost to repair the P130F code on a 2018 Chevrolet Silverado?
Repair costs can vary widely, ranging from $100 for minor wiring repairs to $500 or more if a control module needs to be replaced or reprogrammed.
Discuss the causes and fixes for P130F 2018 Chevrolet Silverado OBDII Code
Code P130F 2018 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
