P130F 2016 GMC Sierra Code - Ignition On/Start Voltage Signal Message Counter Incorrect
Quick Answer
Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Common causes include Faulty Ignition Switch, Ignition Switch harness is open or shorted, Ignition Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P130F 2016 GMC Sierra indicates Ignition On/Start Voltage Signal Message Counter Incorrect.
- Common causes
- Common causes include Faulty Ignition Switch, Ignition Switch harness is open or shorted, Ignition Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P130F 2016 GMC Sierra Description
What are the Possible Causes of the DTC P130F 2016 GMC Sierra?
- Faulty Ignition Switch
- Ignition Switch harness is open or shorted
- Ignition Switch circuit poor electrical connection
How to Fix the DTC P130F 2016 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P130F 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80β$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P130F 2016 GMC Sierra code?
Need more information on how to fix the P130F 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P130F 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P130F 2016 GMC Sierra Code
1. What are the common symptoms of OBDII code P130F in a 2016 GMC Sierra?
- Common symptoms include rough idling, engine misfires, poor acceleration, and potential stalling of the vehicle.
2. What does the OBDII code P130F "Ignition On/Start Voltage Signal Message Counter Incorrect" mean in a 2016 GMC Sierra?
- This code indicates that the ECM has detected a discrepancy in the ignition on/start voltage signal message counter.
3. What are the possible causes of OBDII code P130F in a 2016 GMC Sierra?
- Possible causes include a faulty ignition switch, wiring issues, a defective ECM, or a communication error within the vehicle's network.
4. How can I diagnose the cause of OBDII code P130F in my 2016 GMC Sierra?
- Diagnosing this code may require a scan tool to check for other related codes, testing the ignition switch, inspecting wiring connections, and checking the ECM for proper operation.
5. Can I still drive my 2016 GMC Sierra with OBDII code P130F present?
- It is not recommended to drive the vehicle with this code active, as it can lead to further engine performance issues and potential safety concerns.
6. Is it safe to reset the OBDII code P130F in my 2016 GMC Sierra without addressing the underlying issue?
- Resetting the code without fixing the underlying problem may temporarily clear the error, but it will likely reappear once the issue persists. It's best to diagnose and repair the root cause.
7. How much does it typically cost to repair OBDII code P130F in a 2016 GMC Sierra?
- The cost of repairs can vary depending on the exact cause of the code, but it may involve replacing the ignition switch, repairing wiring, or addressing ECM issues, which can range from a few hundred to over a thousand dollars.
8. Can I fix OBDII code P130F in my 2016 GMC Sierra myself?
- While some DIY enthusiasts may be able to address simpler causes like wiring issues, diagnosing and repairing more complex problems related to this code may require professional help to ensure proper resolution.
9. Will OBDII code P130F cause my 2016 GMC Sierra to fail an emissions test?
- Yes, having this code present can cause your vehicle to fail an emissions test, as it indicates a fault in the ignition system that can impact engine performance and emissions.
10. How urgent is it to address OBDII code P130F in my 2016 GMC Sierra?
- It is recommended to address this code promptly to prevent potential engine damage, drivability issues, and safety concerns. Ignoring the issue can lead to more severe problems down the line.
Discuss the causes and fixes for P130F 2016 GMC Sierra OBDII Code
Code P130F 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.