P130F Code - Ignition On/Start Voltage Signal Message Counter Incorrect
Quick Answer
Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Common causes include Faulty Ignition Switch, Ignition Switch harness is open or shorted, Ignition Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P130F indicates Ignition On/Start Voltage Signal Message Counter Incorrect.
- Common causes
- Common causes include Faulty Ignition Switch, Ignition Switch harness is open or shorted, Ignition Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P130F Description
What are the Possible Causes of the DTC P130F?
- Faulty Ignition Switch
- Ignition Switch harness is open or shorted
- Ignition Switch circuit poor electrical connection
How to Fix the DTC P130F?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P130F code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P130F code?
Need more information on how to fix the P130F code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P130F code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P130F Buick — Ignition On/Start Voltage Signal Message Counter Incorrect
- P130F Cadillac — Ignition On/Start Voltage Signal Message Counter Incorrect
- P130F Chevrolet — Ignition On/Start Voltage Signal Message Counter Incorrect
- P130F GMC — Ignition On/Start Voltage Signal Message Counter Incorrect
Frequently Asked Questions about P130F Code
1. What are common symptoms of OBDII code P130F?
- Common symptoms include engine misfires, rough idling, decreased fuel efficiency, and a noticeable decrease in engine performance.
2. What can cause the OBDII code P130F to trigger?
- The code may be triggered by issues such as a faulty ignition coil, spark plugs, wiring harness, or a problem with the engine control module.
3. How can I diagnose the cause of OBDII code P130F?
- Diagnosing the issue typically involves inspecting the ignition system components, checking for loose or damaged wiring, and using a diagnostic scan tool to retrieve and analyze the code data.
4. What are some repair tips for resolving OBDII code P130F?
- Repair tips may include replacing faulty ignition components, such as the ignition coil or spark plugs, repairing damaged wiring, and resetting the engine control module after making necessary repairs.
5. Can driving with OBDII code P130F cause further damage to my vehicle?
- Continuing to drive with the code may lead to more severe engine issues over time, such as increased fuel consumption, potential damage to the catalytic converter, and further engine performance degradation.
6. Is it safe to ignore OBDII code P130F and continue driving my vehicle?
- It is not recommended to ignore the code, as unresolved ignition system issues can impact the overall performance and efficiency of your vehicle, potentially leading to more costly repairs in the future.
7. How much does it typically cost to repair OBDII code P130F?
- The cost of repairing the code can vary depending on the specific cause of the issue, but it may range from $100 to $500 or more, including parts and labor.
8. Can I reset OBDII code P130F myself, or do I need to visit a mechanic?
- While you can clear the code using a diagnostic scan tool, it is important to address the underlying issue causing the code to prevent it from reoccurring. If you are unsure about the repairs needed, it is advisable to consult a mechanic.
9. Will OBDII code P130F cause my vehicle to fail emissions testing?
- Yes, if left unresolved, the code may cause your vehicle to fail emissions testing due to increased emissions and decreased engine efficiency.
10. How long does it take to repair OBDII code P130F?
- The repair time can vary depending on the specific cause of the code and the complexity of the repair needed. In general, it may take a few hours to a full day to diagnose and repair the issue.
Discuss the causes and fixes for P130F OBDII Code
Code P130F comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
