AutoCodes – Ford – P130D Ford

P130D Ford Code - Knock Control Combustion Performance Forced Limited Power

Quick Answer

The Knock Sensor contains a piezo crystal. Common causes include Faulty Knock Sensor, Knock Sensor harness is open or shorted, Knock Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P130D Ford indicates Knock Control Combustion Performance Forced Limited Power.
Common causes: Common causes include Faulty Knock Sensor, Knock Sensor harness is open or shorted, Knock Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 24,900

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 13, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P130D Ford Description

The Knock Sensor contains a piezo crystal. When combustion knock occurs in an engine, a distinct noise is produced. The sensor turns vibrations from this noise into an electrical signal. The Engine Control Module (ECM) uses the signal to retard ignition timing and restore normal combustion in the affected engine cylinder. The Knock Sensor may be supplied with a reference voltage from the engine ECM. This allows the ECM to monitor the continuity of the Knock Sensor circuit.
The ECM monitors the Knock Sensor. The ECM sets the Diagnostic Trouble Code (DTC) when the Knock Sensor is not to factory specifications.

OBDII Code P130D Ford - Knock Control Combustion Performance Forced Limited Power - AutoCodes.com — P130D Ford Code - Knock Control Combustion Performance Forced Limited Power

What does this mean?

What are the Possible Causes of the DTC P130D Ford?

Faulty Knock Sensor
Knock Sensor harness is open or shorted
Knock Sensor circuit poor electrical connection

How to Fix the DTC P130D Ford?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P130D Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P130D Ford code?

Need more information on how to fix the P130D Ford code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P130D Ford code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P130D Ford Code

1. What are the common symptoms of OBDII code P130D in a Ford vehicle?

- Common symptoms include engine knocking or pinging noises, reduced engine power, rough idling, and potential illumination of the Check Engine Light.

2. What are the possible causes of OBDII code P130D in a Ford vehicle?

- Possible causes include a faulty knock sensor, issues with the fuel system, incorrect ignition timing, carbon buildup in the combustion chamber, or a problem with the engine control module.

3. How can I diagnose OBDII code P130D in my Ford vehicle?

- Diagnosis typically involves using an OBDII scanner to retrieve the fault code, inspecting the knock sensor and related wiring, checking fuel system components, and performing a compression test to assess engine health.

4. Can I continue driving my Ford vehicle with OBDII code P130D?

- It is not recommended to drive with this code present, as it can lead to reduced engine performance and potential long-term damage if left unaddressed. It is best to have the issue diagnosed and repaired as soon as possible.

5. How can I repair OBDII code P130D in my Ford vehicle?

- Repair options may include replacing the knock sensor, addressing fuel system issues, cleaning the combustion chamber, adjusting ignition timing, or reprogramming the engine control module.

6. Are there any maintenance tips to prevent OBDII code P130D from occurring in my Ford vehicle?

- Regular maintenance such as using high-quality fuel, performing timely oil changes, and ensuring proper ignition system function can help prevent issues that may trigger this code.

7. Can a DIY enthusiast repair OBDII code P130D in a Ford vehicle?

- While some basic diagnostic steps can be taken by DIY enthusiasts, repairing this code may require specialized tools and knowledge. It is recommended to consult a professional mechanic for accurate diagnosis and repair.

8. How much does it typically cost to repair OBDII code P130D in a Ford vehicle?

- The cost of repairs can vary depending on the specific cause of the code and the parts and labor involved. It is advisable to obtain quotes from different repair shops to compare prices.

9. Will resetting the Check Engine Light make OBDII code P130D go away?

- Resetting the Check Engine Light may temporarily clear the code, but if the underlying issue is not addressed, the code is likely to return. It is important to diagnose and repair the root cause of the problem.

10. Can OBDII code P130D cause long-term damage to the engine of my Ford vehicle?

- Ignoring or driving with this code for an extended period can potentially cause damage to the engine, as it may result in inefficient combustion, poor performance, and increased wear over time. Addressing the issue promptly is recommended.