P1307 Hyundai Code - Accelerator Sensor Range/Performance
Quick Answer
The Chassis acceleration(Rough Road) sensor consists of a piezoelectric vibration pick up which detects vertical acceleration of the vehicle.The sensor signal is used by the ECM to determine the degree of vertical movement of the car, for example, on a bumpy road.Since this may also cause uneven engine running, the ECM uses the signal to distinguish the phenomenon from actual misfiring. Common causes include Faulty Acceleration Sensor, Acceleration Sensor harness is open or shorted, Acceleration Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1307 Hyundai indicates Accelerator Sensor Range/Performance.
- Common causes
- Common causes include Faulty Acceleration Sensor, Acceleration Sensor harness is open or shorted, Acceleration Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1307 Hyundai Description
What are the Possible Causes of the DTC P1307 Hyundai?
- Faulty Acceleration Sensor
- Acceleration Sensor harness is open or shorted
- Acceleration Sensor circuit poor electrical connection
How to Fix the DTC P1307 Hyundai?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1307 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1307 Hyundai code?
Need more information on how to fix the P1307 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1307 Hyundai code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1307 Hyundai Code
1. What are the common symptoms of OBDII code P1307 (Hyundai) related to Accelerator Sensor Range/Performance?
Symptoms may include poor acceleration, hesitation or jerking during acceleration, and the vehicle going into limp mode.
2. What are the possible causes of OBDII code P1307 (Hyundai) for Accelerator Sensor Range/Performance?
Potential causes include a faulty accelerator pedal position sensor, accelerator pedal sensor wiring issues, or a problem with the electronic control module.
3. How can I diagnose the issue causing OBDII code P1307 (Hyundai) for Accelerator Sensor Range/Performance?
You can use a diagnostic scanner to read the code and analyze live data to determine the sensor's output values and check for any erratic readings.
4. What is the recommended repair for OBDII code P1307 (Hyundai) related to Accelerator Sensor Range/Performance?
The most common repair involves replacing the accelerator pedal position sensor, ensuring proper wiring connections, and clearing the code with a diagnostic tool.
5. Can I drive my vehicle with OBDII code P1307 (Hyundai) for Accelerator Sensor Range/Performance?
It is not recommended to drive the vehicle with this code present, as it may lead to further damage or unsafe driving conditions due to potential acceleration issues.
6. Are there any DIY tips for troubleshooting OBDII code P1307 (Hyundai) regarding Accelerator Sensor Range/Performance?
You can visually inspect the wiring harness and connectors for any visible damage, check for loose connections, and ensure the accelerator pedal operates smoothly.
7. How long does it typically take to repair OBDII code P1307 (Hyundai) related to Accelerator Sensor Range/Performance?
The repair time can vary depending on the exact cause of the issue, but it usually takes around 1-2 hours for a professional to diagnose and replace the faulty sensor.
8. What can happen if OBDII code P1307 (Hyundai) for Accelerator Sensor Range/Performance is ignored?
Ignoring this code can lead to continued acceleration problems, potential safety hazards on the road, and may result in further damage to the vehicle's engine or transmission.
9. Is it necessary to reset the ECU after repairing OBDII code P1307 (Hyundai) for Accelerator Sensor Range/Performance?
Yes, it is recommended to reset the ECU after completing the repair to clear the error code and allow the system to relearn the sensor's parameters for proper operation.
10. Can extreme weather conditions affect the occurrence of OBDII code P1307 (Hyundai) for Accelerator Sensor Range/Performance?
Yes, extreme temperatures or moisture can impact the sensor's performance, potentially triggering the code due to sensor malfunctions or wiring issues exacerbated by such conditions.
Discuss the causes and fixes for P1307 Hyundai OBDII Code
Code P1307 Hyundai comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
