P12A8 2014 Chevrolet Silverado Code - Fuel Pump Control Status Signal Message Counter Incorrect
Quick Answer
Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Common causes include Faulty Fuel Pump, Fuel Pump harness is open or shorted, Fuel Pump circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P12A8 2014 Chevrolet Silverado indicates Fuel Pump Control Status Signal Message Counter Incorrect.
- Common causes
- Common causes include Faulty Fuel Pump, Fuel Pump harness is open or shorted, Fuel Pump circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P12A8 2014 Chevrolet Silverado Description
What are the Possible Causes of the DTC P12A8 2014 Chevrolet Silverado?
- Faulty Fuel Pump
- Fuel Pump harness is open or shorted
- Fuel Pump circuit poor electrical connection
How to Fix the DTC P12A8 2014 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P12A8 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P12A8 2014 Chevrolet Silverado code?
Need more information on how to fix the P12A8 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P12A8 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P12A8 2014 Chevrolet Silverado Code
1. What does the OBDII code P12A8 mean on a 2014 Chevrolet Silverado?
P12A8 indicates an issue with the fuel pump control module, specifically that the fuel pump control status signal message counter is incorrect.
2. What are the common symptoms of code P12A8 in a 2014 Chevrolet Silverado?
Symptoms may include difficulty starting the engine, reduced engine performance, stalling, or the illumination of the check engine light.
3. What causes the P12A8 code to appear in my Silverado?
Common causes include a malfunctioning fuel pump control module, wiring issues, poor electrical connections, or software-related issues in the fuel control system.
4. Can I drive my 2014 Chevrolet Silverado with a P12A8 code?
While the vehicle may still run, it is not recommended to drive with this code as it can lead to poor engine performance or even engine damage over time.
5. How can I fix the P12A8 code on my Silverado?
Repairs may include inspecting and repairing wiring or connectors, reprogramming the fuel pump control module, or replacing the fuel pump control module if necessary.
6. How do I diagnose the P12A8 trouble code?
Use a scan tool to monitor the fuel pump control module signals, inspect the wiring and connectors for damage, and verify the communication signals between the module and the ECM.
7. Is the P12A8 code related to the fuel pump itself?
Not directly. The code pertains to the control module that manages the fuel pump, not the pump itself, although pump performance can be indirectly affected.
8. How much does it cost to repair a P12A8 code on a 2014 Silverado?
Repair costs can vary but may range from $150 to $600 depending on whether rewiring, reprogramming, or module replacement is required.
9. Can a faulty battery cause the P12A8 code to appear?
Yes, a weak or failing battery can cause communication issues that might trigger the code, so it’s important to check the battery and charging system.
10. Do I need to reprogram the fuel pump control module to fix P12A8?
In some cases, updating or reprogramming the fuel pump control module with the latest software may resolve the issue.
Discuss the causes and fixes for P12A8 2014 Chevrolet Silverado OBDII Code
Code P12A8 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
