AutoCodes – Mitsubishi – P1296 Mitsubishi

P1296 Mitsubishi Code - No 5 Volts to MAP Sensor

Quick Answer

The Manifold Absolute Pressure (MAP) sensor voltage is monitored when the ignition is ON, and battery voltage is more than 10.4 volts. Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1296 Mitsubishi indicates No 5 Volts to MAP Sensor.
Common causes: Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,841

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 24, 2021

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1296 Mitsubishi Description

The Manifold Absolute Pressure (MAP) sensor voltage is monitored when the ignition is ON, and battery voltage is more than 10.4 volts. The Diagnostic Trouble Code (DTC) will be set in Powertrain Control Module (PCM) memory when PCM senses MAP sensor voltage is less than 2.35 volts for 5 seconds with the ignition on.

OBDII Code P1296 Mitsubishi - No 5 Volts to MAP Sensor - AutoCodes.com — P1296 Mitsubishi Code - No 5 Volts to MAP Sensor

What does this mean?

What are the Possible Causes of the DTC P1296 Mitsubishi?

Faulty Manifold Absolute Pressure (MAP) Sensor
Manifold Absolute Pressure Sensor harness is open or shorted
Manifold Absolute Pressure Sensor circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P1296 Mitsubishi?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1296 Mitsubishi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1296 Mitsubishi code?

Need more information on how to fix the P1296 Mitsubishi code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1296 Mitsubishi code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1296 Mitsubishi Code

1. What does the OBDII code P1296 mean on a Mitsubishi?

P1296 indicates that the Engine Control Module (ECM) has detected a loss of the 5-volt reference signal to the Manifold Absolute Pressure (MAP) sensor.

2. What are the symptoms of a P1296 code in a Mitsubishi?

Common symptoms include poor engine performance, rough idling, stalling, reduced fuel efficiency, and an illuminated Check Engine Light.

3. What causes the P1296 code in a Mitsubishi?

Possible causes include a faulty MAP sensor, damaged wiring or connectors, a short or open circuit in the 5-volt reference wire, or a malfunctioning ECM.

4. Can you drive with a P1296 code on a Mitsubishi?

It is not recommended to drive with this code, as it can lead to poor engine performance and potentially cause further damage to the engine or emissions system.

5. How do I diagnose a P1296 code on a Mitsubishi?

Start by inspecting the MAP sensor, wiring, and connectors for damage or corrosion. Use a multimeter to check for proper 5-volt reference voltage at the sensor. If no issues are found, test the ECM.

6. How do you fix a P1296 code in a Mitsubishi?

Repairs may include replacing the MAP sensor, repairing or replacing damaged wiring or connectors, or addressing issues with the ECM if it is determined to be faulty.

7. What tools are needed to fix a P1296 code?

You may need a multimeter, wiring diagrams, a scan tool, and basic hand tools to inspect and repair electrical components.

8. Can a bad MAP sensor cause a P1296 code?

Yes, a faulty MAP sensor can cause this code if it fails to properly receive or utilize the 5-volt reference signal.

9. How much does it cost to fix a P1296 code in a Mitsubishi?

The cost depends on the specific issue. Replacing a MAP sensor typically costs $50-$200, while wiring repairs or ECM replacement can range from $100 to over $1,000.

10. Can low battery voltage trigger a P1296 code in a Mitsubishi?

While unlikely, low battery voltage or charging system issues can sometimes affect the ECMâ€™s ability to provide a stable 5-volt reference signal. Always check the vehicle's electrical system as part of the diagnosis.