P1295 Mitsubishi Code - No 5 Volts To Throttle Position Sensor
Quick Answer
P1295 Mitsubishi indicates No 5 Volts To Throttle Position Sensor. Common causes include Faulty Throttle Position Sensor (TPS), Throttle Position Sensor (TPS) harness is open or shorted, Throttle Position Sensor (TPS) circuit poor electrical conenction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1295 Mitsubishi indicates No 5 Volts To Throttle Position Sensor.
- Common causes
- Common causes include Faulty Throttle Position Sensor (TPS), Throttle Position Sensor (TPS) harness is open or shorted, Throttle Position Sensor (TPS) circuit poor electrical conenction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1295 Mitsubishi Description
What are the Possible Causes of the DTC P1295 Mitsubishi?
- Faulty Throttle Position Sensor (TPS)
- Throttle Position Sensor (TPS) harness is open or shorted
- Throttle Position Sensor (TPS) circuit poor electrical conenction
How to Fix the DTC P1295 Mitsubishi?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1295 Mitsubishi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1295 Mitsubishi code?
Need more information on how to fix the P1295 Mitsubishi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1295 Mitsubishi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1295 Mitsubishi Code
1. What does the OBDII code P1295 mean on a Mitsubishi?
P1295 indicates that the engine control module (ECM) has detected no 5-volt reference signal to the throttle position sensor (TPS), which is necessary for proper throttle operation.
2. What are the symptoms of code P1295 in a Mitsubishi vehicle?
Common symptoms include poor acceleration, reduced engine power, stalling, an illuminated check engine light, and erratic throttle response.
3. What causes the P1295 code in a Mitsubishi?
Potential causes include a faulty throttle position sensor (TPS), damaged wiring or connectors in the TPS circuit, a defective ECM, or issues with the 5-volt reference circuit.
4. Can a faulty throttle position sensor trigger the P1295 code?
Yes, a faulty TPS is one of the primary causes of this code, as it may fail to receive the required 5-volt reference signal from the ECM.
5. How can I diagnose the P1295 code on my Mitsubishi?
Start by inspecting the TPS wiring and connectors for damage or loose connections. Use a multimeter to check for the presence of a 5-volt reference signal at the TPS. If no voltage is present, test the circuit and the ECM.
6. Is it safe to drive with the P1295 code on a Mitsubishi?
Driving with this code is not recommended, as it can lead to reduced engine performance, unsafe driving conditions, and potential damage to other components.
7. How do I fix the P1295 code in my Mitsubishi?
Repairs may include replacing the throttle position sensor, repairing or replacing damaged wiring or connectors, or, in rare cases, replacing the ECM if it is faulty.
8. Can a problem with the ECM cause the P1295 code?
Yes, a malfunctioning ECM may fail to provide the 5-volt reference signal to the TPS, triggering the P1295 code.
9. What tools are needed to troubleshoot the P1295 code?
You’ll need an OBDII scanner, a multimeter to test voltage, and possibly a wiring diagram for your Mitsubishi model to trace the 5-volt reference circuit.
10. Does the P1295 code always mean the TPS is bad?
No, the TPS may not be the issue. The problem could also lie in the wiring, connectors, or ECM that supplies the 5-volt reference signal. Proper diagnosis is essential.
Discuss the causes and fixes for P1295 Mitsubishi OBDII Code
Code P1295 Mitsubishi comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
