P1295 Isuzu Code - Electronic Throttle Control Power Management Mode
Quick Answer
P1295 Isuzu indicates Electronic Throttle Control Power Management Mode. Common causes include Faulty Throttle Position (TP) Sensor, Throttle Position (TP) Sensor harness is open or shorted, Throttle Position (TP) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1295 Isuzu indicates Electronic Throttle Control Power Management Mode.
- Common causes
- Common causes include Faulty Throttle Position (TP) Sensor, Throttle Position (TP) Sensor harness is open or shorted, Throttle Position (TP) Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1295 Isuzu Description
What are the Possible Causes of the DTC P1295 Isuzu?
- Faulty Throttle Position (TP) Sensor
- Throttle Position (TP) Sensor harness is open or shorted
- Throttle Position (TP) Sensor circuit poor electrical connection
- Faulty Throttle Motor
- Faulty MAP Sensor
- Faulty Mass Air Flow (MAF) Sensor
- Faulty Engine Control Module (ECM)
How to Fix the DTC P1295 Isuzu?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1295 Isuzu code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1295 Isuzu code?
Need more information on how to fix the P1295 Isuzu code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1295 Isuzu code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1295 Isuzu Code
1. What does the OBDII code P1295 mean for an Isuzu?
P1295 indicates an issue with the Electronic Throttle Control (ETC) system entering "Power Management Mode," which is a failsafe designed to limit engine performance to protect the system.
2. What are common symptoms of the P1295 code in an Isuzu?
Symptoms may include reduced engine power, a lit check engine light, poor throttle response, and difficulty accelerating.
3. What causes the P1295 code to appear on an Isuzu?
Common causes include a malfunctioning throttle body, a faulty throttle position sensor, wiring or connector issues, or problems with the power supply to the ETC system.
4. Can I drive my Isuzu with the P1295 code active?
Driving with the P1295 code is not recommended, as reduced power mode can make the vehicle unsafe in certain situations, such as merging or climbing hills.
5. How do I diagnose the P1295 code on an Isuzu?
Start by checking the throttle body, throttle position sensor, and related wiring for damage or faults. Use a scan tool to monitor throttle position sensor data and power supply to the ETC system.
6. Is the P1295 code specific to Isuzu vehicles?
No, the P1295 code can appear on other vehicles with ETC systems, but the exact diagnostic and repair process may vary depending on the make and model.
7. How can I fix the P1295 code on my Isuzu?
Repairs may involve cleaning or replacing the throttle body, repairing damaged wiring, replacing the throttle position sensor, or addressing any issues with the ETC power supply.
8. Will clearing the code fix the P1295 issue in an Isuzu?
Clearing the code may temporarily remove the check engine light, but unless the underlying issue is resolved, the code is likely to return.
9. How much does it cost to repair the P1295 code on an Isuzu?
Repair costs can vary, ranging from $100 for simple fixes like cleaning the throttle body to $500 or more for replacing the throttle body or throttle position sensor.
10. Can a dirty throttle body cause the P1295 code in an Isuzu?
Yes, a dirty or clogged throttle body can restrict airflow and cause the ETC system to enter Power Management Mode, triggering the P1295 code.
Discuss the causes and fixes for P1295 Isuzu OBDII Code
Code P1295 Isuzu comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
