P1292 Ford Code - Injector High Side Short To Ground Or Battery Voltage Bank 2
Quick Answer
The Powertrain Control Module (PCM) monitors the output of the fuel injector circuits and sets a Diagnostic Trouble Code (DTC) when it detects the output is not within a calibrated limit. Common causes include Faulty Fuel Injector, Fuel Injector harness is open or shorted, Fuel Injector circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1292 Ford indicates Injector High Side Short To Ground Or Battery Voltage Bank 2.
- Common causes
- Common causes include Faulty Fuel Injector, Fuel Injector harness is open or shorted, Fuel Injector circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1292 Ford Description
What are the Possible Causes of the DTC P1292 Ford?
- Faulty Fuel Injector
- Fuel Injector harness is open or shorted
- Fuel Injector circuit poor electrical connection
How to Fix the DTC P1292 Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
2011-2012 Ford F-Super Duty
2011-2012 Ford F-Super Duty Factory Service Bulletin OBDII Code P1292
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1292 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1292 Ford code?
Need more information on how to fix the P1292 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1292 Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1292 Ford Code
1. What are the common symptoms of OBDII code P1292 on a Ford vehicle?
- Common symptoms include engine misfires, rough idling, loss of power, and potentially a noticeable decrease in fuel efficiency.
2. What can cause the OBDII code P1292 to trigger on a Ford vehicle?
- This code is typically triggered by a high side short to ground or battery voltage in the injector circuit of Bank 2, indicating an electrical issue.
3. How can I diagnose the cause of OBDII code P1292 on my Ford?
- To diagnose this code, you may need to perform a thorough inspection of the injector wiring, connectors, and the injector itself to determine the exact source of the electrical fault.
4. Is it safe to drive my Ford with OBDII code P1292 present?
- It is not recommended to drive your vehicle with this code active, as it can lead to further damage to the engine and emission control systems.
5. Can a DIY enthusiast repair OBDII code P1292 on a Ford?
- While some experienced DIY enthusiasts may be able to repair this issue, it is recommended to seek professional help to accurately diagnose and fix the electrical fault causing the code.
6. How much does it typically cost to repair OBDII code P1292 on a Ford at a repair shop?
- The cost of repairing this code can vary depending on the exact cause of the issue and labor rates in your area, but it may range from a hundred to a few hundred dollars.
7. Will resetting the OBDII code P1292 clear the issue on my Ford?
- Resetting the code may temporarily turn off the check engine light, but if the underlying electrical fault is not addressed, the code is likely to reappear.
8. Can a faulty fuel injector cause OBDII code P1292 on a Ford?
- Yes, a faulty fuel injector in Bank 2 can potentially cause the high side short to ground or battery voltage issue that triggers this code.
9. How urgent is it to address OBDII code P1292 on my Ford?
- It is important to address this code promptly to prevent further damage to the engine and ensure optimal performance and fuel efficiency.
10. Are there any preventive measures to avoid OBDII code P1292 on a Ford?
- Regular maintenance, such as inspecting and cleaning injector connections, can help prevent electrical issues that may lead to this code.
Discuss the causes and fixes for P1292 Ford OBDII Code
Code P1292 Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
