P1285 2007 Ford Fusion Code - Cylinder Head Over Temperature Condition
Quick Answer
The Cylinder Head Temperature (CHT) Sensor is a thermistor device in which resistance changes with temperature. Common causes include Engine overheated, Low engine coolant level, Faulty Cylinder Head Temperature (CHT) Sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1285 2007 Ford Fusion indicates Cylinder Head Over Temperature Condition.
- Common causes
- Common causes include Engine overheated, Low engine coolant level, Faulty Cylinder Head Temperature (CHT) Sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1285 2007 Ford Fusion Description
The CHT sensor is installed in the aluminum cylinder head and measures the metal temperature. The CHT sensor can provide complete engine temperature information and can be used to infer coolant temperature. If the CHT sensor conveys an overheating condition to the PCM, the PCM initiates a fail-safe cooling strategy based on information from the CHT sensor. A cooling system concern such as low coolant or coolant loss could cause an overheating condition. As a result, damage to major engine components could occur. Using both the CHT sensor and fail-safe cooling strategy, the PCM prevents damage by allowing air cooling of the engine and limp-home capability.
The Diagnostic Trouble Code (DTC) indicates the Cylinder Head Over Temperature Sensed Indicates an engine overheat condition was sensed by the cylinder head temperature sensor.
What are the Possible Causes of the DTC P1285 2007 Ford Fusion?
- Engine overheated
- Low engine coolant level
- Faulty Cylinder Head Temperature (CHT) Sensor
- Cylinder Head Temperature Sensor harness is open or shorted
- Cylinder Head Temperature Sensor circuit poor electrical connection
How to Fix the DTC P1285 2007 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1285 2007 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1285 2007 Ford Fusion code?
Need more information on how to fix the P1285 2007 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1285 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1285 2007 Ford Fusion Code
1. What are the common symptoms of OBDII code P1285 in a 2007 Ford Fusion?
The common symptoms of code P1285 in a 2007 Ford Fusion include engine overheating, rough idling, loss of power, and possible coolant leaks.
2. What does the OBDII code P1285 indicate in a 2007 Ford Fusion?
The OBDII code P1285 in a 2007 Ford Fusion indicates a Cylinder Head Over Temperature Condition, which means the engine is running hotter than normal.
3. What are the possible causes of OBDII code P1285 in a 2007 Ford Fusion?
Possible causes of code P1285 in a 2007 Ford Fusion include a malfunctioning cooling system, a faulty temperature sensor, a stuck thermostat, or a problem with the engine's cooling fan.
4. How can I diagnose the OBDII code P1285 in my 2007 Ford Fusion?
To diagnose code P1285 in a 2007 Ford Fusion, you can start by checking the coolant level, inspecting for leaks, testing the temperature sensor, and ensuring the cooling fan is functioning properly.
5. How serious is OBDII code P1285 in a 2007 Ford Fusion?
Code P1285 in a 2007 Ford Fusion should be taken seriously as it indicates a potential issue with the engine's cooling system, which can lead to overheating and engine damage if not addressed promptly.
6. Can I continue driving my 2007 Ford Fusion with OBDII code P1285?
It is not recommended to continue driving a 2007 Ford Fusion with OBDII code P1285 as it can cause further damage to the engine due to overheating.
7. How can I repair OBDII code P1285 in my 2007 Ford Fusion?
Repairing OBDII code P1285 in a 2007 Ford Fusion may involve fixing coolant leaks, replacing a faulty temperature sensor, replacing a stuck thermostat, or repairing the cooling fan.
8. Are there any DIY tips for troubleshooting OBDII code P1285 in a 2007 Ford Fusion?
DIY tips for troubleshooting code P1285 in a 2007 Ford Fusion include checking coolant levels, inspecting for visible leaks, testing the temperature sensor with a multimeter, and ensuring the cooling fan is operational.
9. How much does it cost to fix OBDII code P1285 in a 2007 Ford Fusion?
The cost to fix OBDII code P1285 in a 2007 Ford Fusion can vary depending on the specific issue, but it may range from a few hundred to a thousand dollars, including parts and labor.
10. Can resetting the OBDII system clear code P1285 in a 2007 Ford Fusion?
Resetting the OBDII system may temporarily clear code P1285 in a 2007 Ford Fusion, but the underlying issue causing the code will need to be addressed to prevent it from reoccurring.
Discuss the causes and fixes for P1285 2007 Ford Fusion OBDII Code
Code P1285 2007 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
