AutoCodes – Buick – P1283 Buick

P1283 Buick Code - Accelerator Pedal Position Sensor 2 Circuit High Voltage

Quick Answer

The Accelerator Pedal Position (APP) sensors are located within the Throttle Actuator Control (TAC) module assembly. Common causes include Faulty Accelerator Pedal Position (APP), Accelerator Pedal Position harness is open or shorted, Accelerator Pedal Position circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1283 Buick indicates Accelerator Pedal Position Sensor 2 Circuit High Voltage.
Common causes: Common causes include Faulty Accelerator Pedal Position (APP), Accelerator Pedal Position harness is open or shorted, Accelerator Pedal Position circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,124

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 05, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1283 Buick Description

The Accelerator Pedal Position (APP) sensors are located within the Throttle Actuator Control (TAC) module assembly. The TAC module assembly is mounted to the accelerator pedal bracket. There are 3 individual APP sensors within the TAC module. Three separate signal circuits, low reference circuits, and 5-volt reference circuits are used in order to determine the accelerator pedal position. The APP sensor signal voltages increase when the accelerator pedal is depressed.

OBDII Code P1283 Buick - Accelerator Pedal Position Sensor 2 Circuit High Voltage - AutoCodes.com — P1283 Buick Code - Accelerator Pedal Position Sensor 2 Circuit High Voltage

What does this mean?

What are the Possible Causes of the DTC P1283 Buick?

Faulty Accelerator Pedal Position (APP)
Accelerator Pedal Position harness is open or shorted
Accelerator Pedal Position circuit poor electrical connection

How to Fix the DTC P1283 Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1283 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1283 Buick code?

Need more information on how to fix the P1283 Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1283 Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.