P127D 2016 GMC Sierra Code - Fuel Rail Pressure Sensor 2 Circuit High Voltage
Quick Answer
The Engine Control Module (ECM) uses the Fuel Rail Pressure (FRP) sensor to constantly adjust the high-pressure fuel pump's feed rate so that the ideal pressure is permanently maintained in the high-pressure section (between the high-pressure fuel pump and the injectors) by means of closed-loop control. Common causes include Low or no fuel, Faulty Fuel Rail Pressure Sensor 2, Fuel Rail Pressure Sensor 2 harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P127D 2016 GMC Sierra indicates Fuel Rail Pressure Sensor 2 Circuit High Voltage.
- Common causes
- Common causes include Low or no fuel, Faulty Fuel Rail Pressure Sensor 2, Fuel Rail Pressure Sensor 2 harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P127D 2016 GMC Sierra Description
What are the Possible Causes of the DTC P127D 2016 GMC Sierra?
- Low or no fuel
- Faulty Fuel Rail Pressure Sensor 2
- Fuel Rail Pressure Sensor 2 harness is open or shorted
- Fuel Rail Pressure Sensor 2 circuit poor electrical connection
- Faulty Fuel Pump
How to Fix the DTC P127D 2016 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P127D 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P127D 2016 GMC Sierra code?
Need more information on how to fix the P127D 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P127D 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P127D 2016 GMC Sierra Code
1. What does the OBDII code P127D mean for a 2016 GMC Sierra?
The P127D code indicates that the Fuel Rail Pressure Sensor 2 is detecting a circuit high voltage issue, meaning the sensor is sending a signal above its normal range.
2. What are common symptoms of the P127D code on a GMC Sierra?
Symptoms include poor engine performance, difficulty starting, reduced fuel efficiency, and potential check engine light illumination.
3. What causes the P127D code to appear on a 2016 GMC Sierra?
Common causes include a faulty fuel rail pressure sensor, wiring issues such as damaged or corroded connections, or a malfunctioning ECM.
4. Can driving with the P127D code damage my 2016 GMC Sierra?
Yes, ignoring the P127D code can lead to long-term engine damage due to improper fuel pressure regulation.
5. How is the P127D code diagnosed?
A mechanic will use a scan tool to confirm the code, inspect the fuel rail pressure sensor, check wiring and connectors, and test the ECM for issues.
6. What steps can I take to fix the P127D code?
Repairs may include replacing the fuel rail pressure sensor, repairing or replacing damaged wiring, or reprogramming the ECM if needed.
7. How much does it cost to repair the P127D code on a 2016 GMC Sierra?
Repair costs vary but can range from $150 to $500 depending on whether the sensor or ECM needs replacement or wiring repairs are required.
8. Can a dirty fuel system cause the P127D code?
While unlikely, a severely clogged fuel system can contribute to pressure sensor issues. Cleaning the fuel system might help if other causes are ruled out.
9. Does the P127D code affect fuel economy?
Yes, the code can lead to decreased fuel efficiency due to improper fuel pressure regulation and inefficient combustion.
10. Is replacing the fuel rail pressure sensor the only solution for the P127D code?
No, the issue could also stem from wiring problems or ECM faults. Proper diagnosis is essential before replacing parts.
Discuss the causes and fixes for P127D 2016 GMC Sierra OBDII Code
Code P127D 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
