P127C 2014 Chevrolet Silverado Code - Fuel Rail Pressure Sensor 2 Circuit Low Voltage
Quick Answer
The Engine Control Module (ECM) uses the Fuel Rail Pressure (FRP) sensor to constantly adjust the high-pressure fuel pump's feed rate so that the ideal pressure is permanently maintained in the high-pressure section (between the high-pressure fuel pump and the injectors) by means of closed-loop control. Common causes include Low or no fuel, Faulty Fuel Rail Pressure Sensor 2, Fuel Rail Pressure Sensor 2 harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P127C 2014 Chevrolet Silverado indicates Fuel Rail Pressure Sensor 2 Circuit Low Voltage.
- Common causes
- Common causes include Low or no fuel, Faulty Fuel Rail Pressure Sensor 2, Fuel Rail Pressure Sensor 2 harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P127C 2014 Chevrolet Silverado Description
What are the Possible Causes of the DTC P127C 2014 Chevrolet Silverado?
- Low or no fuel
- Faulty Fuel Rail Pressure Sensor 2
- Fuel Rail Pressure Sensor 2 harness is open or shorted
- Fuel Rail Pressure Sensor 2 circuit poor electrical connection
- Faulty Fuel Pump
How to Fix the DTC P127C 2014 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P127C 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P127C 2014 Chevrolet Silverado code?
Need more information on how to fix the P127C 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P127C 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P127C 2014 Chevrolet Silverado Code
1. What does OBDII code P127C mean on a 2014 Chevrolet Silverado?
P127C indicates that the Fuel Rail Pressure Sensor 2 is detecting a low voltage condition, which may affect the fuel system's ability to regulate pressure properly.
2. What are the common symptoms of code P127C in a 2014 Chevrolet Silverado?
Symptoms may include poor engine performance, difficulty starting, reduced fuel efficiency, rough idling, and in some cases, the engine may stall.
3. What causes code P127C in a 2014 Chevrolet Silverado?
Common causes include a faulty fuel rail pressure sensor, damaged wiring or connectors, a malfunctioning fuel pump, or an issue with the powertrain control module (PCM).
4. Can a low fuel level cause code P127C in a 2014 Chevrolet Silverado?
Yes, a very low fuel level or fuel starvation can cause a drop in fuel pressure, potentially triggering the P127C code.
5. How do you diagnose code P127C on a 2014 Chevrolet Silverado?
Diagnosis involves checking the fuel rail pressure sensor's wiring and connectors for damage, testing the sensor's output voltage, and verifying proper fuel pressure using specialized diagnostic tools.
6. Can I drive my 2014 Chevrolet Silverado with code P127C?
It is not recommended to drive with this code active, as it may lead to poor engine performance, increased emissions, and potential engine damage if the problem persists.
7. How is code P127C fixed on a 2014 Chevrolet Silverado?
Repairs may include replacing the fuel rail pressure sensor, repairing damaged wiring or connectors, inspecting and replacing the fuel pump if necessary, or reprogramming the PCM.
8. How much does it cost to fix code P127C on a 2014 Chevrolet Silverado?
The cost can vary but typically ranges from $150 to $500, depending on whether the issue is with the sensor, wiring, or fuel system components.
9. Can a bad fuel pump cause code P127C on a 2014 Chevrolet Silverado?
Yes, a failing fuel pump can cause insufficient fuel pressure, which may trigger the P127C code.
10. Will clearing the code P127C with a scanner fix the issue?
Clearing the code will reset the check engine light temporarily, but the root cause must be addressed to prevent the code from returning.
Discuss the causes and fixes for P127C 2014 Chevrolet Silverado OBDII Code
Code P127C 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
