P1276 NISSAN - Air Fuel Ratio Sensor 1 Bank 1 Circuit High Voltage Detected
P1276 NISSAN Possible Causes
- Faulty air fuel ratio (A/F) sensor 1 heater Bank 1
- Air fuel ratio (A/F) harness is open or shorted
- Air fuel ratio (A/F) circuit poor electrical connection
How do I fix code P1276 NISSAN?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
How much do you know about cars?
Take the AutoCodes.com automotive tests and turbo-charge your car repair knowledge
Cost of diagnosing the P1276 NISSAN code
Labor: 1.0The cost of diagnosing the P1276 NISSAN code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
When is the code detected?The A/F signal computed by ECM from the A/F sensor 1 signal is constantly approx. 0V.
- Engine Light ON (or Service Engine Soon Warning Light)
- Possible rough engine idle
P1276 NISSAN DescriptionThe A/F sensor is a planar dual-cell limit current sensor. The sensor element of the A/F sensor is the combination of a Nernst concentration cell (sensor cell) with an oxygen-pump cell, which transports ions. It has a heater in the element.
The sensor is capable of precise measurement λ= 1, but also in the lean and rich range. Together with its control electronics, the sensor outputs a clear, continuous signal throughout a wide λ range (0.7 < λ < air).
The exhaust gas components diffuse through the diffusion gap at the electrode of the oxygen pump and Nernst concentration cell, where they are brought to thermodynamic balance.
An electronic circuit controls the pump current through the oxygen-pump cell so that the composition of the exhaust gas in the diffusion gap remains constant at λ = 1. Therefore, the A/F sensor is able to indicate air/fuel ratio by this pumping of current. In addition, a heater is integrated in the sensor to ensure the required operating temperature of 700 - 800 C (1,292 - 1,472 F).
More InformationNeed more information on how to fix the P1276 NISSAN code?
Get Access to Factory Service Manuals
Information for specific Nissan models
Need more help?Get the P1276 Nissan code diagnosed by a professional: Find a repair shop in your area
CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P1276 Nissan code? Have you replaced any parts?
Any information is appreciated. Thanks