P1273 2003 NISSAN SENTRA - Air Fuel Ratio Sensor 1 Bank 1 Lean Shift Monitoring
Tech notesIf one or more sensors are replaced the Engine Control Module (ECM) Mixture Ratio Self-Learning clearing procedure must be performed.
Sentra ECM Self-Learning procedure
When is the code detected?The A/F signal computed by ECM from the A/F sensor 1 signal is shifted to the lean side for a specified period.
P1273 2003 Nissan Sentra DescriptionThe Air Fuel Ratio (A/F) sensor is a planar dual-cell limit current sensor. The sensor element of the A/F sensor is the combination of a Nernst concentration cell (sensor cell) with an oxygen-pump cell, which transports ions. It has a heater in the element.
The sensor is capable of precise measurement λ= 1, but also in the lean and rich range. Together with its control electronics, the sensor outputs a clear, continuous signal throughout a wide λ range (0.7 < λ < air).
The exhaust gas components diffuse through the diffusion gap at the electrode of the oxygen pump and Nernst concentration cell, where they are brought to thermodynamic balance.
An electronic circuit controls the pump current through the oxygen-pump cell so that the composition of the exhaust gas in the diffusion gap remains constant at λ = 1. Therefore, the A/F sensor is able to indicate air/fuel ratio by this pumping of current. In addition, a heater is integrated in the sensor to ensure the required operating temperature of 700 - 800 C (1,292 - 1,472 F).
Need more help?Do you need more help with the P1273 2003 Nissan Sentra code? Ask a question to our users or find an automotive repair shop near you to help fix the OBDII code
P1273 2003 NISSAN SENTRA CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P1273 2003 Nissan Sentra code? Have you replaced any parts?
Any information is appreciated. Thanks