AutoCodes - OBDII Code List - P1264 FORD

P1264 FORD - Cylinder #4 High To Low Side Short

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3    What is this?
Table of contents

P1264 FORD Possible Causes

  • Faulty Fuel Injector 4
  • Fuel Injector 4 harness is open or shorted
  • Fuel Injector 4 circuit poor electrical connection
  • Faulty Fuel Injector Interface Module

How do I fix code P1264 FORD?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

Tech Notes

Check valve cover wire harness connections first, including under the valve cover.

Cost of diagnosing the P1264 FORD code

Labor: 1.0

The cost of diagnosing the P1264 FORD code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P1264 FORD Description

The fuel injectors are connected to the high-pressure fuel rail and deliver a calibrated amount of fuel directly into the combustion chamber. The piezo actuator is commanded on by the PCM during the main injection stage for approximately 0-400 microseconds. The fuel injectors on and off time are controlled by the piezo actuator device which allows extreme precision during the injection cycle. The Diagnostic Trouble Code (DTC) is detected by the Fuel Injector Interface Module in the secondary (rearward) fuel injector circuit.
OBDII Code P1264 Ford - Cylinder #4 High To Low Side Short -

More Information

Need more information on how to fix the P1264 FORD code?
Get Access to Factory Service Manuals

Need more help?

Get the P1264 Ford code diagnosed by a professional: Find a repair shop in your area


Help us improve Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P1264 Ford code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧