AutoCodesMazda – P1262 Mazda

P1262 Mazda Code - Cylinder #2 High To Low Side Short

Quick Answer

The fuel injectors are connected to the high-pressure fuel rail and deliver a calibrated amount of fuel directly into the combustion chamber. Common causes include Faulty Fuel Injector 2, Fuel Injector 2 harness is open or shorted, Fuel Injector 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1262 Mazda indicates Cylinder #2 High To Low Side Short.
Common causes
Common causes include Faulty Fuel Injector 2, Fuel Injector 2 harness is open or shorted, Fuel Injector 2 circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 8,832
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jul 02, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1262 Mazda Description

The fuel injectors are connected to the high-pressure fuel rail and deliver a calibrated amount of fuel directly into the combustion chamber. The piezo actuator is commanded on by the PCM during the main injection stage for approximately 0-400 microseconds. The fuel injectors on and off time are controlled by the piezo actuator device which allows extreme precision during the injection cycle. The Diagnostic Trouble Code (DTC) is detected by the Fuel Injector Interface Module in the secondary (rearward) fuel injector circuit.
OBDII Code P1262 Mazda - Cylinder #2 High To Low Side Short - AutoCodes.com
P1262 Mazda Code - Cylinder #2 High To Low Side Short

What are the Possible Causes of the DTC P1262 Mazda?

  • Faulty Fuel Injector 2
  • Fuel Injector 2 harness is open or shorted
  • Fuel Injector 2 circuit poor electrical connection
  • Faulty Fuel Injector Interface Module

How to Fix the DTC P1262 Mazda?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1262 Mazda code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1262 Mazda code?

Need more information on how to fix the P1262 Mazda code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1262 Mazda code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1262 Mazda Code

1. What does the OBDII code P1262 mean on a Mazda?

P1262 indicates a "Cylinder #2 High To Low Side Short," meaning there’s an electrical short in the injector circuit for cylinder #2.

2. What are the common symptoms of P1262 in a Mazda?

Symptoms include rough idling, misfires, reduced engine power, poor fuel economy, and the check engine light turning on.

3. What causes the P1262 code to appear on a Mazda?

The code can be caused by damaged wiring, a faulty fuel injector, a shorted injector circuit, or an issue with the powertrain control module (PCM).

4. Can I drive my Mazda with the P1262 code?

Driving with P1262 is not recommended as it can lead to poor performance, increased emissions, and potential engine damage.

5. How do I diagnose the P1262 code on my Mazda?

Diagnosis involves inspecting the wiring and connectors for cylinder #2, testing the fuel injector, and checking for shorts or open circuits in the injector harness.

6. What tools are needed to troubleshoot the P1262 code?

You’ll need a scan tool, a multimeter, and possibly an injector tester to properly diagnose the issue.

7. How much does it cost to fix the P1262 code on a Mazda?

Repair costs depend on the issue. Replacing a fuel injector may cost $200–$400, while fixing wiring issues could be less expensive.

8. Can a bad PCM cause the P1262 code in my Mazda?

Yes, though it’s rare, a malfunctioning PCM can send incorrect signals to the injector, triggering the P1262 code.

9. What should I check first when troubleshooting P1262?

Start by inspecting the wiring and connectors for cylinder #2’s injector for damage, corrosion, or loose connections.

10. How can I prevent the P1262 code from reoccurring?

Regular maintenance, inspecting wiring for damage, and timely replacement of faulty components can help prevent P1262 from returning.

Discuss the causes and fixes for P1262 Mazda OBDII Code

Code P1262 Mazda comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play