P124C Code - Injector 5 Positive Voltage Control Circuit Shorted to Control Circuit
Quick Answer
The Engine Control Module (ECM) supplies voltage to each fuel injector on the injector high voltage supply circuits. Common causes include Faulty Fuel Injector 5, Fuel Injector 5 harness is open or shorted, Fuel Injector 5 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P124C indicates Injector 5 Positive Voltage Control Circuit Shorted to Control Circuit.
- Common causes
- Common causes include Faulty Fuel Injector 5, Fuel Injector 5 harness is open or shorted, Fuel Injector 5 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P124C Description
What are the Possible Causes of the DTC P124C?
- Faulty Fuel Injector 5
- Fuel Injector 5 harness is open or shorted
- Fuel Injector 5 circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P124C?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P124C code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P124C code?
Need more information on how to fix the P124C code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P124C code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P124C BMW — Nitrogen Oxide Sensor Operating Readiness Signal Not Available At Start
- P124C Buick — Injector 5 Positive Voltage Control Circuit Shorted to Control Circuit
- P124C Cadillac — Injector 5 Positive Voltage Control Circuit Shorted to Control Circuit
- P124C Chevrolet — Injector 5 Positive Voltage Control Circuit Shorted to Control Circuit
- P124C GMC — Injector 5 Positive Voltage Control Circuit Shorted to Control Circuit
- P124C MINI — Nitrogen Oxide Sensor Operating Readiness Signal Not Available At Start
Frequently Asked Questions about P124C Code
What are common symptoms of OBDII code P124C?
Common symptoms of OBDII code P124C may include rough idling, engine misfires, decreased fuel efficiency, and potentially the illumination of the Check Engine Light.
What are possible causes of OBDII code P124C?
Possible causes of OBDII code P124C can include a short circuit in the wiring harness, a malfunctioning fuel injector, a faulty powertrain control module (PCM), or a poor electrical connection.
How does a short circuit in the injector 5 positive voltage control circuit lead to code P124C?
A short circuit in the injector 5 positive voltage control circuit can cause the voltage to be shorted to the control circuit, disrupting the proper operation of the fuel injector and triggering code P124C in the vehicle's diagnostic system.
What is the importance of addressing OBDII code P124C promptly?
It is important to address OBDII code P124C promptly as it can lead to potential engine performance issues, decreased fuel efficiency, and further damage to the vehicle's components if left unresolved.
What are some diagnostic steps to identify the root cause of OBDII code P124C?
Diagnostic steps to identify the root cause of OBDII code P124C may include inspecting the wiring harness for any visible damage, testing the fuel injector for proper operation, checking the electrical connections, and using a multimeter to measure voltage.
How can a shorted injector 5 positive voltage control circuit be repaired?
A shorted injector 5 positive voltage control circuit can be repaired by replacing the damaged wiring harness, repairing or replacing the faulty fuel injector, ensuring proper electrical connections, and clearing the trouble code from the vehicle's PCM.
Can OBDII code P124C be triggered intermittently?
Yes, OBDII code P124C can be triggered intermittently if the short circuit in the injector 5 positive voltage control circuit occurs sporadically. It is important to address the issue even if the code clears itself temporarily.
What are the implications of ignoring OBDII code P124C?
Ignoring OBDII code P124C can lead to ongoing engine performance issues, potential damage to other components, reduced fuel efficiency, and may eventually result in costly repairs if left unattended.
Discuss the causes and fixes for P124C OBDII Code
Code P124C comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
