P1245 Jaguar Code - No Cranking Signal Low Signal
Quick Answer
P1245 Jaguar indicates No Cranking Signal Low Signal. Common causes include Faulty Crankshaft Position (CKP) Sensor, Crankshaft Position (CKP) Sensor harness is open or shorted, Crankshaft Position (CKP) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1245 Jaguar indicates No Cranking Signal Low Signal.
- Common causes
- Common causes include Faulty Crankshaft Position (CKP) Sensor, Crankshaft Position (CKP) Sensor harness is open or shorted, Crankshaft Position (CKP) Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1245 Jaguar Description
What are the Possible Causes of the DTC P1245 Jaguar?
- Faulty Crankshaft Position (CKP) Sensor
- Crankshaft Position (CKP) Sensor harness is open or shorted
- Crankshaft Position (CKP) Sensor circuit poor electrical connection
How to Fix the DTC P1245 Jaguar?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1245 Jaguar code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1245 Jaguar code?
Need more information on how to fix the P1245 Jaguar code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1245 Jaguar code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1245 Jaguar Code
1. What are the common symptoms of OBDII code P1245 in a Jaguar vehicle?
- Common symptoms include the engine not cranking, difficulty starting the vehicle, and the Check Engine Light being illuminated.
2. What does the OBDII code P1245 Jaguar "No Cranking Signal Low Signal" indicate?
- This code indicates that the engine control module is not receiving a sufficient signal to crank the engine.
3. What are the possible causes of OBDII code P1245 in a Jaguar?
- Possible causes include a faulty crankshaft position sensor, wiring issues, a weak battery, or a malfunctioning starter motor.
4. How can I diagnose the OBDII code P1245 in my Jaguar?
- You can diagnose this code by checking the condition of the crankshaft position sensor, inspecting the wiring for any damage, testing the battery voltage, and checking the starter motor for proper operation.
5. Is it safe to continue driving my Jaguar with OBDII code P1245 present?
- It is not recommended to drive your vehicle with this code as it may result in starting issues or engine stalling, leading to potential safety hazards.
6. Can I repair OBDII code P1245 in my Jaguar myself?
- Depending on your skill level and access to tools, you may be able to address this issue yourself by replacing the faulty component, such as the crankshaft position sensor, or repairing any wiring issues.
7. How much does it typically cost to fix OBDII code P1245 in a Jaguar at a repair shop?
- The cost of fixing this code can vary depending on the specific cause of the issue, but it generally ranges from $200 to $500 including parts and labor.
8. Will resetting the OBDII code P1245 in my Jaguar make the issue go away?
- Resetting the code may temporarily clear the Check Engine Light, but if the underlying issue causing the code is not addressed, it is likely to reappear.
9. Can extreme weather conditions affect the occurrence of OBDII code P1245 in a Jaguar?
- Yes, extreme weather conditions can potentially exacerbate issues related to the crankshaft position sensor or electrical components, leading to the triggering of this code.
10. How important is it to address OBDII code P1245 promptly in a Jaguar?
- It is important to address this code promptly to prevent potential starting problems, engine performance issues, and further damage to components in your Jaguar.
Discuss the causes and fixes for P1245 Jaguar OBDII Code
Code P1245 Jaguar comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
