P1244 Mitsubishi Code - RAM Test For All Area
Quick Answer
P1244 Mitsubishi indicates RAM Test For All Area. Common causes for P1244 Mitsubishi include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1244 Mitsubishi indicates RAM Test For All Area.
- Common causes
- Common causes for P1244 Mitsubishi include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1244 Mitsubishi Description
How to Fix the DTC P1244 Mitsubishi?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1244 Mitsubishi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1244 Mitsubishi code?
Need more information on how to fix the P1244 Mitsubishi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1244 Mitsubishi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1244 Mitsubishi Code
1. What does the OBDII code P1244 mean on a Mitsubishi?
P1244 indicates a fault during the RAM (Random Access Memory) test for all areas in the Engine Control Unit (ECU). This suggests an internal issue with the ECU's memory or processing.
2. What are the common symptoms of the P1244 code?
Symptoms may include a check engine light, poor engine performance, erratic idling, and potential failure to start.
3. What causes the P1244 code to appear?
The most common causes are a malfunctioning ECU, electrical issues such as a short or damaged wiring, or corrupted ECU software.
4. Can a bad battery cause the P1244 code?
Yes, a weak or failing battery can lead to voltage irregularities, which may trigger memory test errors in the ECU.
5. Is the P1244 code specific to Mitsubishi vehicles?
While P1244 may appear on other vehicles, its specific description as "RAM Test For All Area" is tailored to Mitsubishi's diagnostic system.
6. How is the P1244 code diagnosed?
A technician will inspect the ECU, check wiring and connections, verify battery voltage, and potentially perform an ECU memory test using a diagnostic scanner.
7. Can the P1244 code clear itself?
No, this code typically requires diagnosis and repair of the underlying issue before it can be cleared.
8. What are the repair options for the P1244 code?
Repairs may include reprogramming or replacing the ECU, repairing damaged wiring, or addressing power supply issues like a failing battery.
9. Is driving with a P1244 code safe?
It is not recommended to drive with this code, as ECU memory issues can lead to unpredictable engine behavior or further damage.
10. How much does it cost to fix the P1244 code?
Repair costs vary depending on the root cause but may range from $100 for wiring repairs to over $1,000 for ECU replacement.
Discuss the causes and fixes for P1244 Mitsubishi OBDII Code
Code P1244 Mitsubishi comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
