P1244 BMW Code - Fuel Pump Emergency Shutoff
Quick Answer
P1244 BMW indicates Fuel Pump Emergency Shutoff. Common causes for P1244 BMW include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1244 BMW indicates Fuel Pump Emergency Shutoff.
- Common causes
- Common causes for P1244 BMW include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1244 BMW Description
How to Fix the DTC P1244 BMW?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1244 BMW code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1244 BMW code?
Need more information on how to fix the P1244 BMW code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1244 BMW code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1244 BMW Code
1. What does the BMW P1244 code indicate?
The P1244 code refers to a fuel pump emergency shutoff triggered by the vehicle’s control system due to a potential safety or operational issue.
2. What are the common symptoms of the P1244 code on a BMW?
Symptoms include difficulty starting the engine, stalling, reduced fuel pressure, and potential loss of power while driving.
3. What causes the P1244 code to appear in a BMW?
Common causes include a malfunctioning fuel pump, a faulty fuel pump relay, wiring issues, or an emergency signal triggered by the crash or safety system.
4. Can a faulty fuel pump cause the P1244 code?
Yes, a failing or damaged fuel pump can lead to insufficient fuel delivery, triggering the emergency shutoff and the P1244 code.
5. Is it safe to drive a BMW with the P1244 code active?
It’s not recommended to drive the vehicle as the code indicates potential fuel system issues that could lead to stalling or other safety concerns.
6. How can I diagnose the P1244 code on my BMW?
Use an OBD-II scanner to read the code and inspect the fuel pump, relay, wiring, and crash safety system for faults.
7. What repairs are typically needed to fix the P1244 code?
Repairs may involve replacing the fuel pump, repairing damaged wiring, or resetting the emergency shutoff system.
8. Can the P1244 code be cleared without repairs?
Clearing the code without addressing the underlying issue may temporarily remove the warning but won’t resolve the problem.
9. Does the P1244 code always mean the fuel pump needs replacement?
No, the issue could also stem from wiring faults, a bad relay, or a triggered emergency system rather than the fuel pump itself.
10. How much does it typically cost to fix the P1244 code on a BMW?
Repair costs vary widely depending on the issue, but fuel pump replacements can range from $300 to $1,000, excluding diagnostics and labor.
Discuss the causes and fixes for P1244 BMW OBDII Code
Code P1244 BMW comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
