P1244 2012 Ford Fusion Code - Alternator Load Input Failed High
Quick Answer
The Powertrain Control Module (PCM) monitors generator load from the generator/regulator in the form of frequency. Common causes include Faulty Alternator/Generator, Alternator/Generator harness is open or shorted, Alternator/Generator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1244 2012 Ford Fusion indicates Alternator Load Input Failed High.
- Common causes
- Common causes include Faulty Alternator/Generator, Alternator/Generator harness is open or shorted, Alternator/Generator circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1244 2012 Ford Fusion Description
What are the Possible Causes of the DTC P1244 2012 Ford Fusion?
- Faulty Alternator/Generator
- Alternator/Generator harness is open or shorted
- Alternator/Generator circuit poor electrical connection
- Damaged Powertrain Control Module (PCM)
How to Fix the DTC P1244 2012 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1244 2012 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1244 2012 Ford Fusion code?
Need more information on how to fix the P1244 2012 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1244 2012 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1244 2012 Ford Fusion Code
1. What are the common symptoms of OBDII code P1244 (Alternator Load Input Failed High) in a 2012 Ford Fusion?
The common symptoms of P1244 may include the battery warning light on the dashboard, dimming headlights, electrical system malfunctions, and potential issues with starting the vehicle.
2. What can cause the OBDII code P1244 to trigger in a 2012 Ford Fusion?
The P1244 code is typically triggered when the powertrain control module (PCM) detects a high voltage signal from the alternator load input circuit. This can be caused by a faulty alternator, damaged wiring, or a poor connection.
3. How serious is the OBDII code P1244 in a 2012 Ford Fusion?
While the vehicle may still be drivable with the P1244 code, it is important to address the issue promptly as it can lead to battery draining, potential damage to the electrical system, and eventually, the vehicle may not start.
4. What are some DIY repair tips for addressing the OBDII code P1244 in a 2012 Ford Fusion?
DIY repair tips may include checking the alternator connections for any visible damage, inspecting the wiring harness for wear or corrosion, and testing the alternator output using a multimeter to determine if it is functioning properly.
5. Can I continue driving my 2012 Ford Fusion with the OBDII code P1244 present?
It is not recommended to drive the vehicle for an extended period with the P1244 code present, as it can lead to battery discharging and potential issues with the electrical system. It is best to address the problem as soon as possible.
6. How much does it typically cost to repair the OBDII code P1244 in a 2012 Ford Fusion?
The cost of repairing the P1244 code can vary depending on the underlying cause of the issue. It may involve replacing the alternator, repairing damaged wiring, or addressing any other related components, which can range from a couple of hundred dollars to over a thousand dollars.
7. Can resetting the OBDII code P1244 in a 2012 Ford Fusion fix the issue temporarily?
Resetting the code may temporarily turn off the warning light, but it will not fix the underlying problem causing the P1244 code. It is essential to diagnose and repair the issue to prevent further complications.
8. How long does it take to repair the OBDII code P1244 in a 2012 Ford Fusion?
The repair time for the P1244 code can vary depending on the exact cause of the issue and the availability of parts. It may take a few hours to a full day for a mechanic to diagnose and fix the problem.
9. Is the OBDII code P1244 covered under any warranty for a 2012 Ford Fusion?
Depending on the vehicle's warranty status, the repair for the P1244 code may be covered under the manufacturer's warranty or an extended warranty if applicable. It is advisable to check with your dealership or warranty provider for more information.
10. Can a mechanic easily diagnose the OBDII code P1244 in a 2012 Ford Fusion?
A qualified mechanic with the right diagnostic tools can efficiently diagnose the P1244 code by conducting a thorough inspection of the alternator, wiring, and related components. Professional expertise is recommended to accurately pinpoint and resolve the issue.
Discuss the causes and fixes for P1244 2012 Ford Fusion OBDII Code
Code P1244 2012 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
