P1244 2006 Ford Fusion Code - Alternator Load Input Failed High
Quick Answer
The Powertrain Control Module (PCM) monitors generator load from the generator/regulator in the form of frequency. Common causes include Faulty Alternator/Generator, Alternator/Generator harness is open or shorted, Alternator/Generator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1244 2006 Ford Fusion indicates Alternator Load Input Failed High.
- Common causes
- Common causes include Faulty Alternator/Generator, Alternator/Generator harness is open or shorted, Alternator/Generator circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1244 2006 Ford Fusion Description
What are the Possible Causes of the DTC P1244 2006 Ford Fusion?
- Faulty Alternator/Generator
- Alternator/Generator harness is open or shorted
- Alternator/Generator circuit poor electrical connection
- Damaged Powertrain Control Module (PCM)
How to Fix the DTC P1244 2006 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1244 2006 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1244 2006 Ford Fusion code?
Need more information on how to fix the P1244 2006 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1244 2006 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1244 2006 Ford Fusion Code
What does OBDII code P1244 mean for a 2006 Ford Fusion?
P1244 indicates that the alternator load input signal has failed high, meaning the vehicle's PCM (Powertrain Control Module) is detecting an abnormal voltage or load condition from the alternator.
What are common symptoms of code P1244 in a 2006 Ford Fusion?
Common symptoms include the check engine light turning on, erratic alternator behavior, dimming or flickering headlights, and potential battery charging issues.
What causes the P1244 code to appear?
Possible causes include a faulty alternator, damaged or corroded wiring in the alternator circuit, a failed PCM, or a problem with the alternator load input sensor.
Can a bad battery trigger the P1244 code?
While not a direct cause, a weak or failing battery can affect the alternator's performance and potentially contribute to the P1244 code being set.
How is P1244 diagnosed?
A technician will use a scan tool to confirm the code, inspect the alternator and related wiring for damage, and test the alternator load input signal to ensure it’s within the correct voltage range.
Can I drive my 2006 Ford Fusion with the P1244 code?
Driving with this code is not recommended, as it may lead to battery charging failure, which could cause the car to stall or other electrical issues.
What is the most likely fix for the P1244 code?
The most common fix is repairing or replacing the alternator if it's determined to be faulty. Additionally, repairing damaged wiring in the circuit may resolve the issue.
How much does it cost to fix the P1244 code?
Costs vary depending on the specific issue, but alternator replacement typically ranges from $300 to $800, including parts and labor.
Can a PCM failure cause the P1244 code?
Yes, although it’s less common, a faulty PCM can misinterpret alternator load input signals and trigger the P1244 code.
How can I prevent the P1244 code from occurring again?
Regular maintenance of the alternator, battery, and electrical wiring, along with addressing any issues promptly, can help prevent the recurrence of this code.
Discuss the causes and fixes for P1244 2006 Ford Fusion OBDII Code
Code P1244 2006 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
