P1241 CHEVROLET - Injector 7 Output Circuit
P1241 CHEVROLET Possible Causes
- Faulty Fuel Injector 7
- Fuel Injector 7 harness is open or shorted
- Fuel Injector 7 circuit poor electrical connection
- Faulty Fuel Injection Control Module (FICM)
- Faulty Engine Control Module (ECM)
How do I fix code P1241 CHEVROLET?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
There is a factory service bulletin for the following Chevrolet models:
2004 Chevrolet Kodiak
2005 Chevrolet Kodiak
2004 Chevrolet Silverado
2005 Chevrolet Silverado
2004-2005 Chevrolet Kodiak, Silverado Factory Service Bulletin OBDII Code P1241
Cost of diagnosing the P1241 CHEVROLET code
Labor: 1.0The cost of diagnosing the P1241 CHEVROLET code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
- Engine Misfire
- Rough Running
P1241 CHEVROLET DescriptionThe Engine Control Module (ECM) enables the appropriate fuel injector on the compression stroke for each cylinder. The ECM controls the Fuel Injection Control Module (FICM) by grounding the control circuit via a solid state device called a driver. The ECM monitors the state of the driver. If the ECM detects an incorrect voltage for the commanded state of an injector driver, Diagnostic Trouble Code (DTC) P1223, P1226, P1229, P1232, P1235, P1238, P1241, or P1244 will set.
More InformationNeed more information on how to fix the P1241 CHEVROLET code?
Get Access to Factory Service Manuals
Need more help?Get the P1241 Chevrolet code diagnosed by a professional: Find a repair shop in your area
CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P1241 Chevrolet code? Have you replaced any parts?
Any information is appreciated. Thanks