AutoCodesAudi – P1240 Audi

P1240 Audi Code - Injector Circuit Open Cylinder 4

Quick Answer

P1240 Audi indicates Injector Circuit Open Cylinder 4. Common causes include Faulty Fuel Injector 4, Fuel Injector 4 harness is open or shorted, Fuel Injector 4 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1240 Audi indicates Injector Circuit Open Cylinder 4.
Common causes
Common causes include Faulty Fuel Injector 4, Fuel Injector 4 harness is open or shorted, Fuel Injector 4 circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 6,279
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jul 20, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1240 Audi Description

OBDII Code P1240 Audi - Injector Circuit Open Cylinder 4 - AutoCodes.com
P1240 Audi Code - Injector Circuit Open Cylinder 4

What are the Possible Causes of the DTC P1240 Audi?

  • Faulty Fuel Injector 4
  • Fuel Injector 4 harness is open or shorted
  • Fuel Injector 4 circuit poor electrical connection

How to Fix the DTC P1240 Audi?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1240 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1240 Audi code?

Need more information on how to fix the P1240 Audi code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1240 Audi code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1240 Audi Code

1. What does the OBDII code P1240 mean on an Audi?

P1240 indicates an "Injector Circuit Open for Cylinder 4," meaning there's a problem with the electrical circuit controlling the fuel injector for cylinder 4.

2. What are the symptoms of the P1240 code on an Audi?

Symptoms may include engine misfires, rough idling, reduced fuel efficiency, lack of power, and an illuminated check engine light.

3. What causes the P1240 code on an Audi?

Common causes include a faulty fuel injector, damaged wiring or connectors in the injector circuit, a blown fuse, or a malfunctioning ECM (Engine Control Module).

4. Can I drive my Audi with the P1240 code?

Driving with this code is not recommended, as it can lead to further engine damage, poor performance, and unsafe driving conditions.

5. How can I diagnose the P1240 code on my Audi?

Diagnosis involves checking the wiring and connectors for cylinder 4's injector, testing the injector itself, and using a multimeter to verify voltage and continuity in the circuit.

6. How do I fix the P1240 code on an Audi?

Common fixes include repairing or replacing damaged wiring, replacing the faulty injector, or, in rare cases, replacing the ECM if it's determined to be defective.

7. How much does it cost to fix the P1240 code on an Audi?

Repair costs vary, but replacing a fuel injector typically ranges from $150 to $400, while wiring repairs may cost $50 to $200. ECM replacement can be much more expensive.

8. What tools are needed to troubleshoot the P1240 code?

You’ll need an OBDII scanner, a multimeter for electrical testing, and basic hand tools for inspecting and repairing wiring or replacing the injector.

9. Can a dirty fuel injector cause the P1240 code?

No, the code specifically refers to an open circuit, which is an electrical issue, not a physical or mechanical blockage in the injector.

10. Is the P1240 code unique to Audi vehicles?

No, the P1240 code can appear on other makes and models, but the diagnostic and repair steps may vary depending on the vehicle.

Discuss the causes and fixes for P1240 Audi OBDII Code

Code P1240 Audi comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play