P1236 1997 Ford F150 Code - Fuel Pump Control Out Of Range
Quick Answer
The P1236 code indicates the Fuel Pump Drive Module (FPDM) detected an invalid or missing Fuel Pump (FP) circuit signal from the Powertrain Control Module (PCM). Common causes include Faulty Fuel Pump Drive Module (FPDM), FPDM harness is open or shorted, FPDM circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1236 1997 Ford F150 indicates Fuel Pump Control Out Of Range .
- Common causes
- Common causes include Faulty Fuel Pump Drive Module (FPDM), FPDM harness is open or shorted, FPDM circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1236 1997 Ford F150 Description
What are the Possible Causes of the DTC P1236 1997 Ford F150?
- Faulty Fuel Pump Drive Module (FPDM)
- FPDM harness is open or shorted
- FPDM circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P1236 1997 Ford F150?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
P1236 indicates that the FPDM has detected an invalid or missing FP circuit signal from the PCM. The FPDM will send a message to the PCM through the FPM circuit, indicating that this failure has been detected. The PCM will set the DTC when the message is received.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1236 1997 Ford F150 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1236 1997 Ford F150 code?
Need more information on how to fix the P1236 1997 Ford F150 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1236 1997 Ford F150 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1236 1997 Ford F150 Code
1. What does the OBDII code P1236 mean on a 1997 Ford F150?
Code P1236 indicates a "Fuel Pump Control Out Of Range" issue, meaning the Powertrain Control Module (PCM) is detecting a problem with the fuel pump circuit.
2. What are the common symptoms of the P1236 code?
Symptoms may include difficulty starting the engine, engine stalling, reduced performance, and a potential check engine light on the dashboard.
3. What causes the P1236 code to appear?
Common causes include a faulty fuel pump, damaged wiring or connectors in the fuel pump circuit, a failing Fuel Pump Driver Module (FPDM), or a malfunctioning PCM.
4. Can I drive my 1997 Ford F150 with the P1236 code?
Driving with this code is not recommended, as it can lead to poor engine performance or even complete engine stalling, which could be unsafe.
5. How do I diagnose the P1236 code on a 1997 Ford F150?
Start by inspecting the fuel pump wiring and connectors for damage or corrosion. Test the fuel pump, FPDM, and related circuits for proper operation using a multimeter or diagnostic tools.
6. What should I check first for a P1236 code?
The fuel pump relay, wiring, and fuel pump fuse are good starting points, as these are common culprits for this code.
7. How do I fix the P1236 code?
Repairs may include replacing a damaged fuel pump, repairing or replacing damaged wiring, cleaning corroded connectors, or replacing the Fuel Pump Driver Module if faulty.
8. Can a bad PCM cause the P1236 code?
Yes, although it's less common, a malfunctioning PCM can cause this code if it isn't properly communicating with the fuel pump circuit.
9. How much does it cost to fix the P1236 code on a 1997 Ford F150?
Repair costs vary depending on the issue. Replacing a fuel pump could cost $300–$900, while fixing wiring or replacing the FPDM may cost less.
10. Will clearing the P1236 code fix the problem?
Clearing the code may temporarily turn off the check engine light, but the underlying issue must be resolved to prevent the code from returning.
Discuss the causes and fixes for P1236 1997 Ford F150 OBDII Code
Code P1236 1997 Ford F150 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
