P1226 GMC - Injector 2 Output Circuit
P1226 GMC Possible Causes
- Faulty Fuel Injector 2
- Fuel Injector 2 harness is open or shorted
- Fuel Injector 2 circuit poor electrical connection
- Faulty Fuel Injection Control Module (FICM)
- Faulty Engine Control Module (ECM)
How do I fix code P1226 GMC?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
There is a factory service bulletin for the following models:
2004 GMC Sierra
2005 GMC Sierra
2004 GMC Topkick
2005 GMC Topkick
2004-2005 GMC Sierra, Topkick Factory Service Bulletin OBDII Code P1226
Cost of diagnosing the P1226 GMC code
Labor: 1.0The cost of diagnosing the P1226 GMC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
- Engine Misfire
- Rough Running
P1226 GMC DescriptionThe Engine Control Module (ECM) enables the appropriate fuel injector on the compression stroke for each cylinder. The ECM controls the Fuel Injection Control Module (FICM) by grounding the control circuit via a solid state device called a driver. The ECM monitors the state of the driver. If the ECM detects an incorrect voltage for the commanded state of an injector driver, Diagnostic Trouble Code (DTC) P1223, P1226, P1229, P1232, P1235, P1238, P1241, or P1244 will set.
More InformationNeed more information on how to fix the P1226 GMC code?
Get Access to Factory Service Manuals
Need more help?Get the P1226 Gmc code diagnosed by a professional: Find a repair shop in your area
CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P1226 Gmc code? Have you replaced any parts?
Any information is appreciated. Thanks