P1226 2010 NISSAN PATHFINDER Code - Closed Throttle Position Learning Performance Problem
|P1226 2010 NISSAN PATHFINDER code possible causes
- Faulty Electric throttle control actuator (TP sensor 2)
- Electric throttle control actuator (TP sensor 2) harness is open or shorted
- Electric throttle control actuator (TP sensor 2) circuit poor electrical connection
|How do I fix the P1226 2010 NISSAN PATHFINDER code?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|P1226 2010 NISSAN PATHFINDER code tech notesIf there are no intake leaks, clean throttle body, adjust engine idle and erase engine code. If the code comes back you may have to replace the Electric Throttle Control Actuator (Motor) to fix the problem.
Nissan Pathfinder Idle Air Volume Learning Procedure
|Cost of diagnosing the P1226 2010 NISSAN PATHFINDER code
Labor: 1.0The cost of diagnosing the P1226 2010 NISSAN PATHFINDER code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|When is the P1226 2010 NISSAN PATHFINDER code detected?Closed throttle position learning is not performed successfully, repeatedly.
|What are P1226 2010 NISSAN PATHFINDER code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
|P1226 2010 NISSAN PATHFINDER code descriptionElectric Throttle Control Actuator consists of throttle control motor, throttle position sensor, etc. The Throttle Position (TP) sensor responds to the throttle valve movement.
The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the Engine Control Module (ECM). In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.
|Need more information with the P1226 2010 NISSAN PATHFINDER code?Need more information on how to fix the P1226 2010 NISSAN PATHFINDER code? Get Access to Factory Service Manuals
|Need help with a P1226 2010 NISSAN PATHFINDER code?Get the P1226 2010 Nissan Pathfinder code diagnosed by a professional: Find a repair shop in your area
|P1226 2010 NISSAN PATHFINDER code commentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P1226 2010 Nissan Pathfinder code? Have you replaced any parts?
Any information is appreciated. Thanks