P1225 2013 Nissan Rogue Code - Closed Throttle Position Learning Performance Problem
Quick Answer
Electric Throttle Control Actuator consists of throttle control motor, throttle position sensor, etc. Common causes include Faulty Electric throttle control actuator (TP sensor 2), Electric throttle control actuator (TP sensor 2) harness is open or shorted, Electric throttle control actuator (TP sensor 2) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1225 2013 Nissan Rogue indicates Closed Throttle Position Learning Performance Problem.
- Common causes
- Common causes include Faulty Electric throttle control actuator (TP sensor 2), Electric throttle control actuator (TP sensor 2) harness is open or shorted, Electric throttle control actuator (TP sensor 2) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1225 2013 Nissan Rogue Description
The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the Engine Control Module (ECM). In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.
What are the Possible Causes of the DTC P1225 2013 Nissan Rogue?
- Faulty Electric throttle control actuator (TP sensor 2)
- Electric throttle control actuator (TP sensor 2) harness is open or shorted
- Electric throttle control actuator (TP sensor 2) circuit poor electrical connection
How to Fix the DTC P1225 2013 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
Nissan Rogue Idle Air Volume Relearn
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1225 2013 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1225 2013 Nissan Rogue code?
Need more information on how to fix the P1225 2013 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1225 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1225 2013 Nissan Rogue Code
1. What does the OBDII code P1225 mean on a 2013 Nissan Rogue?
The P1225 code indicates a "Closed Throttle Position Learning Performance Problem," meaning the engine control module (ECM) has detected an issue with the throttle position sensor's calibration or learning process.
2. What are the common symptoms of the P1225 code in a 2013 Nissan Rogue?
Symptoms may include poor acceleration, rough idling, reduced fuel efficiency, hesitation during throttle input, and the Check Engine Light being illuminated.
3. What causes the P1225 code to appear in a 2013 Nissan Rogue?
Common causes include a dirty or faulty throttle body, issues with the throttle position sensor, a failing accelerator pedal position sensor, wiring problems, or an incomplete throttle position learning process.
4. Can a dirty throttle body trigger the P1225 code?
Yes, a dirty throttle body can cause improper airflow, which may interfere with the throttle position learning process and trigger the P1225 code.
5. How do you fix the P1225 code on a 2013 Nissan Rogue?
Repairs may involve cleaning the throttle body, performing a throttle position relearn procedure, repairing damaged wiring, or replacing faulty sensors like the throttle position sensor.
6. What is the throttle position relearn procedure for a 2013 Nissan Rogue?
The throttle position relearn procedure typically involves turning the ignition on and off in specific sequences or using a diagnostic scanner to reset the throttle position settings in the ECM.
7. Can I drive my 2013 Nissan Rogue with the P1225 code?
While the vehicle may still be drivable, it is not recommended as it can lead to poor performance, reduced fuel efficiency, and potential damage to other components.
8. How much does it cost to repair the P1225 code on a 2013 Nissan Rogue?
The cost varies depending on the issue but can range from $100 for cleaning the throttle body to $500 or more if sensors or wiring need to be replaced.
9. Will disconnecting the battery clear the P1225 code?
Disconnecting the battery may temporarily reset the code, but it won’t fix the underlying issue causing the problem.
10. Can a faulty accelerator pedal position sensor cause the P1225 code?
Yes, a malfunctioning accelerator pedal position sensor can send incorrect signals to the ECM, leading to a throttle learning performance issue and the P1225 code.
Discuss the causes and fixes for P1225 2013 Nissan Rogue OBDII Code
Code P1225 2013 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
