P1225 2012 Nissan Sentra Code - Closed Throttle Position Learning Performance Problem
Quick Answer
Electric Throttle Control Actuator consists of throttle control motor, throttle position sensor, etc. Common causes include Faulty Electric throttle control actuator (TP sensor 2), Electric throttle control actuator (TP sensor 2) harness is open or shorted, Electric throttle control actuator (TP sensor 2) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1225 2012 Nissan Sentra indicates Closed Throttle Position Learning Performance Problem.
- Common causes
- Common causes include Faulty Electric throttle control actuator (TP sensor 2), Electric throttle control actuator (TP sensor 2) harness is open or shorted, Electric throttle control actuator (TP sensor 2) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1225 2012 Nissan Sentra Description
The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the Engine Control Module (ECM). In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.
What are the Possible Causes of the DTC P1225 2012 Nissan Sentra?
- Faulty Electric throttle control actuator (TP sensor 2)
- Electric throttle control actuator (TP sensor 2) harness is open or shorted
- Electric throttle control actuator (TP sensor 2) circuit poor electrical connection
How to Fix the DTC P1225 2012 Nissan Sentra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1225 2012 Nissan Sentra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1225 2012 Nissan Sentra code?
Need more information on how to fix the P1225 2012 Nissan Sentra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1225 2012 Nissan Sentra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1225 2012 Nissan Sentra Code
1. What does the OBDII code P1225 mean on a 2012 Nissan Sentra?
P1225 indicates a "Closed Throttle Position Learning Performance Problem," meaning the engine control module (ECM) has detected an issue with the throttle position sensor or the throttle body's ability to learn the closed throttle position.
2. What are the common symptoms of a P1225 code on a 2012 Nissan Sentra?
Symptoms may include poor throttle response, rough idling, reduced engine power, stalling, or the check engine light illuminating.
3. What causes the P1225 code to appear on a 2012 Nissan Sentra?
Common causes include a dirty throttle body, faulty throttle position sensor, damaged wiring or connectors, or an ECM calibration issue.
4. Can a dirty throttle body trigger the P1225 code?
Yes, a dirty or carbon-clogged throttle body can prevent the throttle plate from moving correctly, leading to a failure in closed throttle position learning.
5. How do you fix a P1225 code on a 2012 Nissan Sentra?
Cleaning the throttle body, inspecting the throttle position sensor, checking for damaged electrical connections, and performing a throttle position relearn procedure can resolve the issue.
6. What is the throttle position relearn procedure for a 2012 Nissan Sentra?
The relearn process typically involves turning the ignition on and off in specific sequences or using a scan tool to reset the throttle position sensor values in the ECM.
7. Can a P1225 code cause drivability issues?
Yes, this code can lead to reduced throttle response, poor acceleration, or stalling, making the vehicle difficult to drive safely.
8. Is it safe to drive with a P1225 code on a 2012 Nissan Sentra?
It is not recommended to drive for extended periods with this code, as it can lead to inconsistent throttle response and potentially unsafe driving conditions.
9. Can a failing ECM cause the P1225 code?
While rare, a failing or improperly calibrated ECM can cause this issue if it cannot correctly learn or retain the throttle position values.
10. Do I need a professional mechanic to fix the P1225 code?
You can attempt basic fixes like cleaning the throttle body or checking electrical connections, but for advanced diagnostics or ECM programming, a professional mechanic may be needed.
Discuss the causes and fixes for P1225 2012 Nissan Sentra OBDII Code
Code P1225 2012 Nissan Sentra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
