P1225 2011 Nissan Rogue Code - Closed Throttle Position Learning Performance Problem
Quick Answer
Electric Throttle Control Actuator consists of throttle control motor, throttle position sensor, etc. Common causes include Faulty Electric throttle control actuator (TP sensor 2), Electric throttle control actuator (TP sensor 2) harness is open or shorted, Electric throttle control actuator (TP sensor 2) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1225 2011 Nissan Rogue indicates Closed Throttle Position Learning Performance Problem.
- Common causes
- Common causes include Faulty Electric throttle control actuator (TP sensor 2), Electric throttle control actuator (TP sensor 2) harness is open or shorted, Electric throttle control actuator (TP sensor 2) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1225 2011 Nissan Rogue Description
The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the Engine Control Module (ECM). In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.
What are the Possible Causes of the DTC P1225 2011 Nissan Rogue?
- Faulty Electric throttle control actuator (TP sensor 2)
- Electric throttle control actuator (TP sensor 2) harness is open or shorted
- Electric throttle control actuator (TP sensor 2) circuit poor electrical connection
How to Fix the DTC P1225 2011 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
Nissan Rogue Idle Air Volume Relearn
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1225 2011 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1225 2011 Nissan Rogue code?
Need more information on how to fix the P1225 2011 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1225 2011 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1225 2011 Nissan Rogue Code
1. What are the common symptoms of OBDII code P1225 on a 2011 Nissan Rogue?
When experiencing a closed throttle position learning performance problem, you may notice issues such as poor idle quality, stalling, or lack of response when pressing the gas pedal.
2. What could cause the OBDII code P1225 to appear on a 2011 Nissan Rogue?
The code P1225 on a 2011 Nissan Rogue is typically triggered by a fault in the throttle position sensor, throttle body, or related wiring.
3. How can I diagnose the closed throttle position learning performance problem on my 2011 Nissan Rogue?
To diagnose OBDII code P1225, it is recommended to perform a thorough inspection of the throttle position sensor, throttle body, and associated wiring for any signs of damage or malfunction.
4. Is it safe to continue driving my 2011 Nissan Rogue with the P1225 code present?
It is not recommended to drive your vehicle with the OBDII code P1225 present, as it can lead to potential drivability issues and further damage to the throttle system.
5. What are some repair tips for addressing the closed throttle position learning performance problem on a 2011 Nissan Rogue?
Repairing the P1225 code may involve cleaning or replacing the throttle body, recalibrating the throttle position sensor, or repairing any damaged wiring in the throttle system.
6. Can I reset the OBDII code P1225 on my 2011 Nissan Rogue by disconnecting the battery?
While disconnecting the battery may temporarily clear the code, it is essential to address the underlying issue causing the P1225 code to prevent it from reoccurring.
7. How much does it typically cost to repair the closed throttle position learning performance problem on a 2011 Nissan Rogue?
The cost of repairing the P1225 code on a 2011 Nissan Rogue can vary depending on the specific issue, but it may range from a few hundred to a few thousand dollars, including parts and labor.
8. Will the OBDII code P1225 cause my 2011 Nissan Rogue to fail an emissions test?
Yes, the presence of the P1225 code on your 2011 Nissan Rogue can cause it to fail an emissions test due to the impact on the vehicle's throttle performance.
9. Can a DIY enthusiast fix the closed throttle position learning performance problem on a 2011 Nissan Rogue?
While some minor repairs related to the P1225 code may be possible for experienced DIY enthusiasts, it is recommended to consult a professional mechanic for a proper diagnosis and repair to ensure safety and accuracy.
10. How long does it take to repair the OBDII code P1225 on a 2011 Nissan Rogue?
The repair time for the P1225 code on a 2011 Nissan Rogue can vary based on the extent of the issue and the availability of parts, but it may take anywhere from a few hours to a full day to complete the repair.
Discuss the causes and fixes for P1225 2011 Nissan Rogue OBDII Code
Code P1225 2011 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
