P1225 2010 Nissan Rogue Code - Closed Throttle Position Learning Performance Problem
Quick Answer
Electric Throttle Control Actuator consists of throttle control motor, throttle position sensor, etc. Common causes include Faulty Electric throttle control actuator (TP sensor 2), Electric throttle control actuator (TP sensor 2) harness is open or shorted, Electric throttle control actuator (TP sensor 2) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1225 2010 Nissan Rogue indicates Closed Throttle Position Learning Performance Problem.
- Common causes
- Common causes include Faulty Electric throttle control actuator (TP sensor 2), Electric throttle control actuator (TP sensor 2) harness is open or shorted, Electric throttle control actuator (TP sensor 2) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1225 2010 Nissan Rogue Description
The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the Engine Control Module (ECM). In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.
What are the Possible Causes of the DTC P1225 2010 Nissan Rogue?
- Faulty Electric throttle control actuator (TP sensor 2)
- Electric throttle control actuator (TP sensor 2) harness is open or shorted
- Electric throttle control actuator (TP sensor 2) circuit poor electrical connection
How to Fix the DTC P1225 2010 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
Nissan Rogue Idle Air Volume Relearn
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1225 2010 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1225 2010 Nissan Rogue code?
Need more information on how to fix the P1225 2010 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1225 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1225 2010 Nissan Rogue Code
1. What are the common symptoms of OBDII code P1225 in a 2010 Nissan Rogue?
The common symptoms of OBDII code P1225 in a 2010 Nissan Rogue include rough idling, reduced engine performance, and possibly stalling.
2. What does the OBDII code P1225 indicate in a 2010 Nissan Rogue?
OBDII code P1225 in a 2010 Nissan Rogue indicates a Closed Throttle Position Learning Performance Problem.
3. What are the possible causes of OBDII code P1225 in a 2010 Nissan Rogue?
Possible causes of OBDII code P1225 in a 2010 Nissan Rogue include a faulty throttle position sensor, vacuum leaks, or issues with the throttle body.
4. How can I diagnose the Closed Throttle Position Learning Performance Problem in my 2010 Nissan Rogue?
Diagnosing the Closed Throttle Position Learning Performance Problem in a 2010 Nissan Rogue involves checking the throttle position sensor for proper operation and inspecting for any vacuum leaks in the intake system.
5. Is it safe to continue driving my 2010 Nissan Rogue with OBDII code P1225 present?
It is not recommended to drive your 2010 Nissan Rogue with OBDII code P1225 present, as it can lead to further engine performance issues and potential stalling.
6. Can I reset the OBDII code P1225 in my 2010 Nissan Rogue by disconnecting the battery?
While disconnecting the battery may clear the code temporarily, it is important to diagnose and repair the underlying issue causing OBDII code P1225 in your 2010 Nissan Rogue.
7. How can I repair the Closed Throttle Position Learning Performance Problem in my 2010 Nissan Rogue?
Repairing the Closed Throttle Position Learning Performance Problem in a 2010 Nissan Rogue may involve replacing the throttle position sensor, addressing any vacuum leaks, or cleaning the throttle body.
8. Will cleaning the throttle body help resolve OBDII code P1225 in my 2010 Nissan Rogue?
Cleaning the throttle body can sometimes help improve performance, but it may not necessarily resolve the underlying issue causing OBDII code P1225 in your 2010 Nissan Rogue.
9. Can a DIY enthusiast fix OBDII code P1225 in a 2010 Nissan Rogue?
A DIY enthusiast with automotive repair experience may be able to diagnose and repair OBDII code P1225 in a 2010 Nissan Rogue, especially if familiar with throttle position sensor replacement and vacuum leak detection.
10. How can I prevent OBDII code P1225 from reoccurring in my 2010 Nissan Rogue?
To prevent OBDII code P1225 from reoccurring in your 2010 Nissan Rogue, ensure regular maintenance of the throttle system, address any vacuum leaks promptly, and avoid harsh driving habits that may strain the throttle components.
Discuss the causes and fixes for P1225 2010 Nissan Rogue OBDII Code
Code P1225 2010 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
