AutoCodes.com
Login with Google
AutoCodes – Chevrolet – P11FE 2017 Chevrolet Silverado

P11FE 2017 Chevrolet Silverado Code - O2 Low Reference Circuit High Voltage (NOx Sensor 2)

Quick Answer

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. Common causes include Faulty Nitrogen Oxides (NOx) Sensor 2, Nitrogen Oxides Sensor 2 harness is open or shorted, Nitrogen Oxides Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P11FE 2017 Chevrolet Silverado indicates O2 Low Reference Circuit High Voltage (NOx Sensor 2).
Common causes
Common causes include Faulty Nitrogen Oxides (NOx) Sensor 2, Nitrogen Oxides Sensor 2 harness is open or shorted, Nitrogen Oxides Sensor 2 circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Save to My Repairs My Repairs
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 211
How popular is this code, among other codes? Low
What is this?
Table of contents Created and updated by William Orellana on Mar 24, 2024
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P11FE 2017 Chevrolet Silverado Description

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. There are two NOx sensors, one placed upstream of selective catalytic reduction, to measure inlet NOx concentration, and one placed downstream. They are connected with the control module via CAN and all the information is exchanged through it. Since it is a smart sensor, all the electrical monitoring is performed inside the sensor and only the results are sent to the Engine Control Module (ECM). Each NOx sensor contains a sensing cell, a pumping cell, and a heater. A sample of exhaust gas passes through a diffusion gap between the sensing cell and the pumping cell. The NOx sensor maintains a constant reference voltage across the sensing cell. An electronic circuit within the sensor controls the pump current through the pumping cell in order to maintain a constant voltage in the sensing cell. The amount of current required to maintain the reference voltage in the sensing cell is proportional to the concentration of NOx in the exhaust. The ECM varies the amount of diesel exhaust fluid (reductant) added by varying the reductant injector duty cycle in response to changes in engine exhaust NOx levels. The smart NOx sensors consist of two components, the NOx module and the NOx sensor element that are serviced as a unit. A circuit or performance condition with a NOx sensor is detected by the NOx sensor module. The smart NOx sensor module communicates the condition to the ECM over the serial data line. The ECM sets a DTC when a serial data message is received from the NOx sensor module. The Diagnostic Trouble Code (DTC) will be set if the ECM software detects a fault in the NOx sensor circuitry or a performance fault in the NOx sensor for greater than 2 s.
OBDII Code P11FE 2017 Chevrolet Silverado - O2 Low Reference Circuit High Voltage (NOx Sensor 2) - AutoCodes.com
P11FE 2017 Chevrolet Silverado Code - O2 Low Reference Circuit High Voltage (NOx Sensor 2)
What does this mean?

What are the Possible Causes of the DTC P11FE 2017 Chevrolet Silverado?

  • Faulty Nitrogen Oxides (NOx) Sensor 2
  • Nitrogen Oxides Sensor 2 harness is open or shorted
  • Nitrogen Oxides Sensor 2 circuit poor electrical connection

How to Fix the DTC P11FE 2017 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P11FE 2017 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P11FE 2017 Chevrolet Silverado code?

Need more information on how to fix the P11FE 2017 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P11FE 2017 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P11FE 2017 Chevrolet Silverado Code

1. What does the OBDII code P11FE mean for a 2017 Chevrolet Silverado?

The P11FE code indicates an issue with the O2 low reference circuit reporting high voltage, specifically related to NOx Sensor 2.

2. What are the common symptoms of the P11FE code?

Symptoms may include a check engine light, reduced fuel efficiency, poor engine performance, and potential emissions test failure.

3. What causes the P11FE code to appear?

Common causes include a faulty NOx Sensor 2, damaged wiring or connectors in the low reference circuit, or issues with the engine control module (ECM).

4. How is the P11FE code diagnosed?

A technician will use a scan tool to verify the code, inspect the wiring and connectors for damage, and test the NOx sensor for proper operation.

5. Can I drive my Silverado with the P11FE code?

While the vehicle may still be drivable, it is not recommended as it can lead to increased emissions, reduced performance, and potential damage to other components.

6. How do I fix the P11FE code on my 2017 Silverado?

Repairs may involve replacing the faulty NOx Sensor 2, repairing damaged wiring or connectors, or reprogramming/updating the ECM.

7. How much does it cost to repair the P11FE code?

The cost can vary but typically ranges from $200 to $600, depending on whether the NOx sensor or wiring needs repair or replacement.

8. Can a dirty exhaust system cause the P11FE code?

A dirty or clogged exhaust system is unlikely to cause this code directly but can contribute to NOx sensor issues over time.

9. How can I prevent the P11FE code from returning?

Regular maintenance, including inspecting and cleaning the exhaust system and ensuring good-quality fuel, can help prevent recurrence.

10. Is the P11FE code covered under warranty for a 2017 Silverado?

It may be covered under the emissions warranty if the vehicle is within the warranty period and mileage limits. Check with your dealer for specifics.

Discuss the causes and fixes for P11FE 2017 Chevrolet Silverado OBDII Code

Submit a New Comment

Code P11FE 2017 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play