P11EF BMW Code - Throttle/Pedal Positio Sensor/Switch 'E' Circuit Voltage High
Quick Answer
The accelerator pedal position is monitored separately by 2 individual sensors. Common causes include Faulty Accelerator Pedal, Accelerator Pedal harness is open or shorted, Accelerator Pedal circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P11EF BMW indicates Throttle/Pedal Positio Sensor/Switch 'E' Circuit Voltage High.
- Common causes
- Common causes include Faulty Accelerator Pedal, Accelerator Pedal harness is open or shorted, Accelerator Pedal circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P11EF BMW Description
Each change in the accelerator-pedal position is transmitted to the engine-management control unit with a maximum lag of 50 milliseconds. Sensor signals are transmitted in analog form. The engine-management control unit monitors the two input signals from the sensors and compares them for plausibility (factors such as mutual synchronicity, linearity, etc.).
The Digital Motor Electronics (DME) diagnosis the voltage at the Accelerator Pedal Module Pedal Sensor 2. The Diagnostic Trouble Code (DTC) is detected whenever the voltage on pedal sensor 2 becomes greater than the limit value. Limit value: 0.5 multiplied by 4.75 V.
What are the Possible Causes of the DTC P11EF BMW?
- Faulty Accelerator Pedal
- Accelerator Pedal harness is open or shorted
- Accelerator Pedal circuit poor electrical connection
- Faulty Accelerator Pedal Module
How to Fix the DTC P11EF BMW?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P11EF BMW code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P11EF BMW code?
Need more information on how to fix the P11EF BMW code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P11EF BMW code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P11EF BMW Code
1. What are the common symptoms of OBDII code P11EF in a BMW related to the throttle/pedal position sensor/switch 'E' circuit voltage high?
- Common symptoms include reduced engine power, hesitation or stalling while driving, and the illumination of the Check Engine Light.
2. What are the potential causes of OBDII code P11EF in a BMW?
- The code P11EF in a BMW is typically caused by issues with the throttle/pedal position sensor/switch 'E' circuit, such as a faulty sensor, damaged wiring, or a poor electrical connection.
3. How can I diagnose the cause of OBDII code P11EF in my BMW?
- Diagnosing OBDII code P11EF usually involves using a diagnostic scanner to read the code, checking the throttle/pedal position sensor for proper operation, inspecting the wiring for damage, and testing the electrical connections.
4. Can I drive my BMW with OBDII code P11EF present?
- It is not recommended to drive your BMW with OBDII code P11EF present, as it can lead to performance issues and potential safety hazards. It is best to address the underlying problem as soon as possible.
5. What are some repair tips for fixing OBDII code P11EF in a BMW?
- Repair tips for OBDII code P11EF may include replacing the throttle/pedal position sensor, repairing any damaged wiring, cleaning electrical connections, and clearing the error code with a diagnostic tool.
6. How much does it typically cost to repair OBDII code P11EF in a BMW?
- The cost to repair OBDII code P11EF in a BMW can vary depending on the specific cause of the issue, but it may range from a few hundred to a few thousand dollars, including parts and labor.
7. Can resetting the Check Engine Light resolve OBDII code P11EF in a BMW?
- Resetting the Check Engine Light may temporarily clear the code, but it will not fix the underlying issue causing OBDII code P11EF. It is important to diagnose and address the root cause of the problem.
8. Are there any DIY fixes for OBDII code P11EF in a BMW?
- While some simple checks like inspecting wiring connections can be done DIY, resolving OBDII code P11EF often requires specialized tools and expertise, so it is recommended to seek professional help.
9. How long does it take to repair OBDII code P11EF in a BMW?
- The repair time for OBDII code P11EF in a BMW can vary based on the complexity of the issue and the availability of parts. It may take a few hours to a full day for the repair to be completed.
10. Will OBDII code P11EF affect the fuel efficiency of my BMW?
- Yes, OBDII code P11EF can affect the fuel efficiency of your BMW due to potential issues with the throttle/pedal position sensor, which can impact the engine's performance and overall fuel consumption.
Discuss the causes and fixes for P11EF BMW OBDII Code
Code P11EF BMW comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
