AutoCodes – Chevrolet – P11DC 2014 Chevrolet Silverado

P11DC 2014 Chevrolet Silverado Code - NOx Sensor 2 Current Performance

Quick Answer

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. Common causes include Faulty Nitrogen Oxides (NOx) Sensor 2, Nitrogen Oxides Sensor 2 harness is open or shorted, Nitrogen Oxides Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P11DC 2014 Chevrolet Silverado indicates NOx Sensor 2 Current Performance.
Common causes: Common causes include Faulty Nitrogen Oxides (NOx) Sensor 2, Nitrogen Oxides Sensor 2 harness is open or shorted, Nitrogen Oxides Sensor 2 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 273

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 24, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P11DC 2014 Chevrolet Silverado Description

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. There are two NOx sensors, one placed upstream of selective catalytic reduction, to measure inlet NOx concentration, and one placed downstream. They are connected with the control module via CAN and all the information is exchanged through it. Since it is a smart sensor, all the electrical monitoring is performed inside the sensor and only the results are sent to the Engine Control Module (ECM). Each NOx sensor contains a sensing cell, a pumping cell, and a heater. A sample of exhaust gas passes through a diffusion gap between the sensing cell and the pumping cell. The NOx sensor maintains a constant reference voltage across the sensing cell. An electronic circuit within the sensor controls the pump current through the pumping cell in order to maintain a constant voltage in the sensing cell. The amount of current required to maintain the reference voltage in the sensing cell is proportional to the concentration of NOx in the exhaust. The ECM varies the amount of diesel exhaust fluid (reductant) added by varying the reductant injector duty cycle in response to changes in engine exhaust NOx levels. The smart NOx sensors consist of two components, the NOx module and the NOx sensor element that are serviced as a unit. A circuit or performance condition with a NOx sensor is detected by the NOx sensor module. The smart NOx sensor module communicates the condition to the ECM over the serial data line. The ECM sets a DTC when a serial data message is received from the NOx sensor module. The Diagnostic Trouble Code (DTC) will be set if the ECM software detects a fault in the NOx sensor circuitry or a performance fault in the NOx sensor for greater than 2 s.

OBDII Code P11DC 2014 Chevrolet Silverado - NOx Sensor 2 Current Performance - AutoCodes.com — P11DC 2014 Chevrolet Silverado Code - NOx Sensor 2 Current Performance

What does this mean?

What are the Possible Causes of the DTC P11DC 2014 Chevrolet Silverado?

Faulty Nitrogen Oxides (NOx) Sensor 2
Nitrogen Oxides Sensor 2 harness is open or shorted
Nitrogen Oxides Sensor 2 circuit poor electrical connection

How to Fix the DTC P11DC 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P11DC 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P11DC 2014 Chevrolet Silverado code?

Need more information on how to fix the P11DC 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P11DC 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P11DC 2014 Chevrolet Silverado Code

What does the OBDII code P11DC mean on a 2014 Chevrolet Silverado?

1. P11DC refers to "NOx Sensor 2 Current Performance," indicating an issue with the downstream nitrogen oxide (NOx) sensor's performance or its electrical circuit. 2.

What are the common symptoms of code P11DC in a 2014 Chevrolet Silverado?

Symptoms may include a check engine light, reduced fuel efficiency, poor engine performance, or the truck entering limp mode. 3.

What causes the P11DC code in a 2014 Chevrolet Silverado?

Common causes include a faulty NOx sensor, wiring or connector issues, exhaust leaks, or problems with the diesel exhaust fluid (DEF) system. 4.

Can I drive my 2014 Chevrolet Silverado with a P11DC code?

While the vehicle may still be drivable, continued use can increase emissions and potentially cause further damage to the exhaust system. 5.

How do I diagnose the P11DC code on a 2014 Chevrolet Silverado?

Diagnosis involves scanning for codes, inspecting the NOx sensor and wiring, checking for exhaust leaks, and testing the DEF system for proper function. 6.

How do I fix the P11DC code on a 2014 Chevrolet Silverado?

Repairs may include replacing the faulty NOx sensor, repairing damaged wiring, fixing exhaust leaks, or servicing the DEF system. 7.

How much does it cost to fix the P11DC code on a 2014 Chevrolet Silverado?

The cost of repairs can vary but typically ranges from $300 to $800, depending on whether the sensor or other components need replacement. 8.

Can a bad NOx sensor damage my 2014 Chevrolet Silverado?

A faulty NOx sensor can lead to increased emissions, reduced performance, and strain on the DEF and exhaust systems if left unaddressed. 9.

Do I need to replace both NOx sensors if I have a P11DC code?

Not necessarily. P11DC specifically refers to NOx Sensor 2, but it's a good idea to inspect both sensors to ensure they are functioning properly. 10.

Can a software update fix the P11DC code on a 2014 Chevrolet Silverado?

In some cases, a software update for the engine control module (ECM) may resolve communication issues or improve sensor performance, but physical repairs are often required.