AutoCodes – GMC – P11DB 2015 GMC Sierra

P11DB 2015 GMC Sierra Code - NOx Sensor Current Performance Bank 1 Sensor 1

Quick Answer

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. Common causes include Faulty Nitrogen Oxides (NOx) Sensor, Nitrogen Oxides Sensor harness is open or shorted, Nitrogen Oxides Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P11DB 2015 GMC Sierra indicates NOx Sensor Current Performance Bank 1 Sensor 1.
Common causes: Common causes include Faulty Nitrogen Oxides (NOx) Sensor, Nitrogen Oxides Sensor harness is open or shorted, Nitrogen Oxides Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 244

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 24, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P11DB 2015 GMC Sierra Description

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. There are two NOx sensors, one placed upstream of selective catalytic reduction, to measure inlet NOx concentration, and one placed downstream. They are connected with the control module via CAN and all the information is exchanged through it. Since it is a smart sensor, all the electrical monitoring is performed inside the sensor and only the results are sent to the Engine Control Module (ECM). Each NOx sensor contains a sensing cell, a pumping cell, and a heater. A sample of exhaust gas passes through a diffusion gap between the sensing cell and the pumping cell. The NOx sensor maintains a constant reference voltage across the sensing cell. An electronic circuit within the sensor controls the pump current through the pumping cell in order to maintain a constant voltage in the sensing cell. The amount of current required to maintain the reference voltage in the sensing cell is proportional to the concentration of NOx in the exhaust. The ECM varies the amount of diesel exhaust fluid (reductant) added by varying the reductant injector duty cycle in response to changes in engine exhaust NOx levels. The smart NOx sensors consist of two components, the NOx module and the NOx sensor element that are serviced as a unit. A circuit or performance condition with a NOx sensor is detected by the NOx sensor module. The smart NOx sensor module communicates the condition to the ECM over the serial data line. The ECM sets a DTC when a serial data message is received from the NOx sensor module. The Diagnostic Trouble Code (DTC) will be set if the ECM software detects a fault in the NOx sensor circuitry or a performance fault in the NOx sensor for greater than 2 s.

OBDII Code P11DB 2015 GMC Sierra - NOx Sensor Current Performance Bank 1 Sensor 1 - AutoCodes.com — P11DB 2015 GMC Sierra Code - NOx Sensor Current Performance Bank 1 Sensor 1

What does this mean?

What are the Possible Causes of the DTC P11DB 2015 GMC Sierra?

Faulty Nitrogen Oxides (NOx) Sensor
Nitrogen Oxides Sensor harness is open or shorted
Nitrogen Oxides Sensor circuit poor electrical connection

How to Fix the DTC P11DB 2015 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P11DB 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P11DB 2015 GMC Sierra code?

Need more information on how to fix the P11DB 2015 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P11DB 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P11DB 2015 GMC Sierra Code

1. What does the OBDII code P11DB mean on a 2015 GMC Sierra?

P11DB indicates an issue with the NOx sensor current performance on Bank 1 Sensor 1, meaning the sensor is not operating within the expected parameters.

2. What are the symptoms of code P11DB in a 2015 GMC Sierra?

Symptoms may include reduced fuel efficiency, a check engine light, poor engine performance, or the vehicle entering limp mode.

3. What causes the P11DB code in a 2015 GMC Sierra?

Common causes include a faulty NOx sensor, wiring issues, excessive soot buildup, or problems with the exhaust aftertreatment system.

4. How do I diagnose the P11DB code on my 2015 GMC Sierra?

Diagnosis involves scanning for codes, inspecting the NOx sensor and its wiring, and checking for soot or DEF (Diesel Exhaust Fluid) system issues.

5. Can I drive my 2015 GMC Sierra with the P11DB code?

Driving with this code is possible but not recommended as it can lead to increased emissions, reduced performance, and potential damage to the exhaust system.

6. How do I fix the P11DB code on a 2015 GMC Sierra?

Repairs may include replacing the faulty NOx sensor, cleaning soot buildup, repairing damaged wiring, or addressing DEF-related issues.

7. How much does it cost to fix the P11DB code on a 2015 GMC Sierra?

The cost can vary but typically ranges from $300 to $500 for a NOx sensor replacement, plus diagnostic and labor fees.

8. Can a software update fix the P11DB code on a 2015 GMC Sierra?

In some cases, a PCM (Powertrain Control Module) update from the dealership may resolve issues related to sensor calibration or performance.

9. What happens if I ignore the P11DB code on my 2015 GMC Sierra?

Ignoring the code can lead to worsening fuel economy, higher emissions, potential damage to the catalytic converter, and eventual failure of the DEF system.

10. Is the P11DB code covered under warranty for a 2015 GMC Sierra?

Depending on mileage and coverage, emissions-related components like the NOx sensor may still be covered under the vehicleâ€™s emissions warranty. Check with your dealer for details.