AutoCodes – Chevrolet – P11DB 2015 Chevrolet Silverado

P11DB 2015 Chevrolet Silverado Code - NOx Sensor Current Performance Bank 1 Sensor 1

Quick Answer

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. Common causes include Faulty Nitrogen Oxides (NOx) Sensor, Nitrogen Oxides Sensor harness is open or shorted, Nitrogen Oxides Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P11DB 2015 Chevrolet Silverado indicates NOx Sensor Current Performance Bank 1 Sensor 1.
Common causes: Common causes include Faulty Nitrogen Oxides (NOx) Sensor, Nitrogen Oxides Sensor harness is open or shorted, Nitrogen Oxides Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 299

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 24, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P11DB 2015 Chevrolet Silverado Description

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. There are two NOx sensors, one placed upstream of selective catalytic reduction, to measure inlet NOx concentration, and one placed downstream. They are connected with the control module via CAN and all the information is exchanged through it. Since it is a smart sensor, all the electrical monitoring is performed inside the sensor and only the results are sent to the Engine Control Module (ECM). Each NOx sensor contains a sensing cell, a pumping cell, and a heater. A sample of exhaust gas passes through a diffusion gap between the sensing cell and the pumping cell. The NOx sensor maintains a constant reference voltage across the sensing cell. An electronic circuit within the sensor controls the pump current through the pumping cell in order to maintain a constant voltage in the sensing cell. The amount of current required to maintain the reference voltage in the sensing cell is proportional to the concentration of NOx in the exhaust. The ECM varies the amount of diesel exhaust fluid (reductant) added by varying the reductant injector duty cycle in response to changes in engine exhaust NOx levels. The smart NOx sensors consist of two components, the NOx module and the NOx sensor element that are serviced as a unit. A circuit or performance condition with a NOx sensor is detected by the NOx sensor module. The smart NOx sensor module communicates the condition to the ECM over the serial data line. The ECM sets a DTC when a serial data message is received from the NOx sensor module. The Diagnostic Trouble Code (DTC) will be set if the ECM software detects a fault in the NOx sensor circuitry or a performance fault in the NOx sensor for greater than 2 s.

OBDII Code P11DB 2015 Chevrolet Silverado - NOx Sensor Current Performance Bank 1 Sensor 1 - AutoCodes.com — P11DB 2015 Chevrolet Silverado Code - NOx Sensor Current Performance Bank 1 Sensor 1

What does this mean?

What are the Possible Causes of the DTC P11DB 2015 Chevrolet Silverado?

Faulty Nitrogen Oxides (NOx) Sensor
Nitrogen Oxides Sensor harness is open or shorted
Nitrogen Oxides Sensor circuit poor electrical connection

How to Fix the DTC P11DB 2015 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P11DB 2015 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P11DB 2015 Chevrolet Silverado code?

Need more information on how to fix the P11DB 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P11DB 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P11DB 2015 Chevrolet Silverado Code

1. What does the P11DB code mean on a 2015 Chevrolet Silverado?

The P11DB code indicates a "NOx Sensor Current Performance Bank 1 Sensor 1" issue, meaning the engine control module (ECM) has detected a current performance fault with the upstream nitrogen oxide (NOx) sensor.

2. What are the symptoms of a P11DB code?

Common symptoms include poor fuel economy, reduced engine performance, the check engine light turning on, and potential emissions test failure.

3. What causes the P11DB code to appear?

Possible causes include a faulty NOx sensor, damaged sensor wiring or connectors, excessive soot buildup on the sensor, or issues with the ECM.

4. Can I drive my 2015 Silverado with a P11DB code?

While the truck may still be drivable, ignoring this code can lead to increased emissions, reduced fuel efficiency, and potential damage to the emission system.

5. How do I diagnose the P11DB code?

Diagnosis involves scanning for codes with an OBDII scanner, inspecting the wiring and connectors for damage, testing the NOx sensor's functionality, and verifying the ECM's operation.

6. How do I fix the P11DB code on my Silverado?

Repairs may include replacing the faulty NOx sensor, repairing damaged wiring or connectors, cleaning soot from the sensor, or updating/reprogramming the ECM if necessary.

7. How much does it cost to fix a P11DB code?

The cost depends on the repair, with NOx sensor replacement typically ranging from $300 to $700, plus labor costs if done by a professional.

8. Can a dirty diesel exhaust fluid (DEF) system trigger a P11DB code?

Yes, contaminated DEF or a malfunctioning DEF injector can contribute to NOx sensor issues, potentially triggering this code.

9. How often should NOx sensors be replaced on a 2015 Silverado?

NOx sensors typically last between 50,000 to 100,000 miles, but factors such as driving conditions, soot buildup, and DEF quality can affect lifespan.

10. Will clearing the P11DB code with a scanner fix the issue?

Clearing the code may temporarily turn off the check engine light, but the underlying issue must be addressed to prevent the code from returning.