AutoCodes.com
Login with Google
AutoCodes – GMC – P11DA 2015 GMC Sierra

P11DA 2015 GMC Sierra Code - O2 Pump Current Control Circuit High Voltage (NOx Sensor 2)

Quick Answer

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. Common causes include Faulty Nitrogen Oxides (NOx) Sensor 2, Nitrogen Oxides Sensor 2 harness is open or shorted, Nitrogen Oxides Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P11DA 2015 GMC Sierra indicates O2 Pump Current Control Circuit High Voltage (NOx Sensor 2).
Common causes
Common causes include Faulty Nitrogen Oxides (NOx) Sensor 2, Nitrogen Oxides Sensor 2 harness is open or shorted, Nitrogen Oxides Sensor 2 circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Save to My Repairs My Repairs
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 185
How popular is this code, among other codes? Low
What is this?
Table of contents Created and updated by William Orellana on Mar 24, 2024
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P11DA 2015 GMC Sierra Description

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. There are two NOx sensors, one placed upstream of selective catalytic reduction, to measure inlet NOx concentration, and one placed downstream. They are connected with the control module via CAN and all the information is exchanged through it. Since it is a smart sensor, all the electrical monitoring is performed inside the sensor and only the results are sent to the Engine Control Module (ECM). Each NOx sensor contains a sensing cell, a pumping cell, and a heater. A sample of exhaust gas passes through a diffusion gap between the sensing cell and the pumping cell. The NOx sensor maintains a constant reference voltage across the sensing cell. An electronic circuit within the sensor controls the pump current through the pumping cell in order to maintain a constant voltage in the sensing cell. The amount of current required to maintain the reference voltage in the sensing cell is proportional to the concentration of NOx in the exhaust. The ECM varies the amount of diesel exhaust fluid (reductant) added by varying the reductant injector duty cycle in response to changes in engine exhaust NOx levels. The smart NOx sensors consist of two components, the NOx module and the NOx sensor element that are serviced as a unit. A circuit or performance condition with a NOx sensor is detected by the NOx sensor module. The smart NOx sensor module communicates the condition to the ECM over the serial data line. The ECM sets a DTC when a serial data message is received from the NOx sensor module. The Diagnostic Trouble Code (DTC) will be set if the ECM software detects a fault in the NOx sensor circuitry or a performance fault in the NOx sensor for greater than 2 s.
OBDII Code P11DA 2015 GMC Sierra - O2 Pump Current Control Circuit High Voltage (NOx Sensor 2) - AutoCodes.com
P11DA 2015 GMC Sierra Code - O2 Pump Current Control Circuit High Voltage (NOx Sensor 2)
What does this mean?

What are the Possible Causes of the DTC P11DA 2015 GMC Sierra?

  • Faulty Nitrogen Oxides (NOx) Sensor 2
  • Nitrogen Oxides Sensor 2 harness is open or shorted
  • Nitrogen Oxides Sensor 2 circuit poor electrical connection

How to Fix the DTC P11DA 2015 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P11DA 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P11DA 2015 GMC Sierra code?

Need more information on how to fix the P11DA 2015 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P11DA 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P11DA 2015 GMC Sierra Code

1. What does the OBDII code P11DA mean on a 2015 GMC Sierra?

The P11DA code indicates a problem with the O2 Pump Current Control Circuit for NOx Sensor 2, specifically that the voltage is too high.

2. What are the common symptoms of code P11DA?

Symptoms may include an illuminated check engine light, reduced fuel efficiency, decreased engine performance, and potential limp mode activation.

3. What causes the P11DA code to appear?

Common causes include a faulty NOx sensor 2, damaged wiring or connectors in the circuit, a malfunctioning engine control module (ECM), or an issue with the sensor's pump current control system.

4. Can a loose connection cause the P11DA code?

Yes, loose or corroded wiring or connectors in the NOx sensor circuit can cause high voltage issues and trigger the P11DA code.

5. How do I diagnose the P11DA code on a 2015 GMC Sierra?

Start by inspecting the wiring and connectors for damage or corrosion. Use a scan tool to monitor NOx sensor readings and verify if the sensor is functioning correctly. Check for proper voltage and ground in the circuit.

6. Is it safe to drive with the P11DA code?

Driving with this code is generally not recommended, as it can lead to poor engine performance, higher emissions, and potential damage to the catalytic converter.

7. How do I fix the P11DA code?

Repairs may involve replacing the NOx Sensor 2, repairing damaged wiring or connectors, or reprogramming or replacing the ECM if necessary.

8. How much does it cost to repair the P11DA code?

The cost can vary, but replacing a NOx sensor typically ranges from $300 to $500, while wiring repairs or ECM replacements may cost more depending on labor and parts.

9. Can a faulty NOx sensor cause other problems?

Yes, a faulty NOx sensor can lead to increased emissions, reduced fuel economy, and possible damage to the exhaust aftertreatment system.

10. Do I need to clear the P11DA code after making repairs?

Yes, use an OBDII scan tool to clear the code after completing repairs. If the issue is resolved, the code should not return.

Discuss the causes and fixes for P11DA 2015 GMC Sierra OBDII Code

Submit a New Comment

Code P11DA 2015 GMC Sierra comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play