AutoCodes – Chevrolet – P11D8 2018 Chevrolet Silverado

P11D8 2018 Chevrolet Silverado Code - O2 Pump Current Control Circuit (NOx Sensor 2)

Quick Answer

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. Common causes include Faulty Nitrogen Oxides (NOx) Sensor 2, Nitrogen Oxides Sensor 2 harness is open or shorted, Nitrogen Oxides Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P11D8 2018 Chevrolet Silverado indicates O2 Pump Current Control Circuit (NOx Sensor 2).
Common causes
Common causes include Faulty Nitrogen Oxides (NOx) Sensor 2, Nitrogen Oxides Sensor 2 harness is open or shorted, Nitrogen Oxides Sensor 2 circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 283
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Mar 24, 2024
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P11D8 2018 Chevrolet Silverado Description

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. There are two NOx sensors, one placed upstream of selective catalytic reduction, to measure inlet NOx concentration, and one placed downstream. They are connected with the control module via CAN and all the information is exchanged through it. Since it is a smart sensor, all the electrical monitoring is performed inside the sensor and only the results are sent to the Engine Control Module (ECM). Each NOx sensor contains a sensing cell, a pumping cell, and a heater. A sample of exhaust gas passes through a diffusion gap between the sensing cell and the pumping cell. The NOx sensor maintains a constant reference voltage across the sensing cell. An electronic circuit within the sensor controls the pump current through the pumping cell in order to maintain a constant voltage in the sensing cell. The amount of current required to maintain the reference voltage in the sensing cell is proportional to the concentration of NOx in the exhaust. The ECM varies the amount of diesel exhaust fluid (reductant) added by varying the reductant injector duty cycle in response to changes in engine exhaust NOx levels. The smart NOx sensors consist of two components, the NOx module and the NOx sensor element that are serviced as a unit. A circuit or performance condition with a NOx sensor is detected by the NOx sensor module. The smart NOx sensor module communicates the condition to the ECM over the serial data line. The ECM sets a DTC when a serial data message is received from the NOx sensor module. The Diagnostic Trouble Code (DTC) will be set if the ECM software detects a fault in the NOx sensor circuitry or a performance fault in the NOx sensor for greater than 2 s.
OBDII Code P11D8 2018 Chevrolet Silverado - O2 Pump Current Control Circuit (NOx Sensor 2) - AutoCodes.com
P11D8 2018 Chevrolet Silverado Code - O2 Pump Current Control Circuit (NOx Sensor 2)

What are the Possible Causes of the DTC P11D8 2018 Chevrolet Silverado?

  • Faulty Nitrogen Oxides (NOx) Sensor 2
  • Nitrogen Oxides Sensor 2 harness is open or shorted
  • Nitrogen Oxides Sensor 2 circuit poor electrical connection

How to Fix the DTC P11D8 2018 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P11D8 2018 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P11D8 2018 Chevrolet Silverado code?

Need more information on how to fix the P11D8 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P11D8 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P11D8 2018 Chevrolet Silverado Code

1. What does the OBDII code P11D8 mean on a 2018 Chevrolet Silverado?

The code P11D8 refers to an "O2 Pump Current Control Circuit" issue related to NOx Sensor 2, indicating a problem with the oxygen pump control circuit in the sensor.

2. What are the common symptoms of code P11D8 in a Silverado?

Symptoms may include reduced engine performance, increased emissions, poor fuel economy, and possible illumination of the Check Engine Light.

3. What causes the P11D8 code to appear on a 2018 Chevrolet Silverado?

Common causes include a faulty NOx Sensor 2, damaged wiring or connectors in the sensor circuit, or a malfunctioning Engine Control Module (ECM).

4. Can I drive my Silverado with the P11D8 code?

While the vehicle may still be drivable, it is not recommended as the issue can lead to increased emissions and potential damage to the emission control system.

5. How do you diagnose the P11D8 code on a 2018 Chevrolet Silverado?

Diagnosis involves using a scan tool to check for additional codes, inspecting the wiring and connections to NOx Sensor 2, and testing the sensor and circuit for proper operation.

6. How can I fix the P11D8 code on my Silverado?

Repairs may include replacing the NOx Sensor 2, repairing damaged wiring, cleaning connectors, or reprogramming/updating the ECM if necessary.

7. What is NOx Sensor 2 in a 2018 Chevrolet Silverado?

NOx Sensor 2 monitors nitrogen oxide (NOx) levels downstream of the catalytic converter to ensure the emissions system is functioning correctly.

8. Is replacing the NOx Sensor 2 the only solution for P11D8?

No, the issue may also be caused by wiring or ECM problems, so a proper diagnosis is crucial before replacing the sensor.

9. How much does it cost to fix the P11D8 code on a Chevrolet Silverado?

The cost can vary but typically ranges from $300 to $800, depending on whether only the sensor needs replacement or additional repairs are required.

10. Can a software update resolve the P11D8 code?

In some cases, an ECM software update or reprogramming may resolve the issue if the problem is related to incorrect control parameters.

Discuss the causes and fixes for P11D8 2018 Chevrolet Silverado OBDII Code

Code P11D8 2018 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play