P11D7 Chevrolet Code - Downstream NOx Sensor Self Diagnostic Bank 1 Sensor 2
Quick Answer
The reductant system uses two Nitrogen Oxide (NOx) sensors to monitor the amount of NOx in the engine's exhaust gas. Common causes include Faulty Nitrogen Oxide (NOx) Sensor, Nitrogen Oxide (NOx) Sensor harness is open or shorted, Nitrogen Oxide (NOx) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P11D7 Chevrolet indicates Downstream NOx Sensor Self Diagnostic Bank 1 Sensor 2.
- Common causes
- Common causes include Faulty Nitrogen Oxide (NOx) Sensor, Nitrogen Oxide (NOx) Sensor harness is open or shorted, Nitrogen Oxide (NOx) Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P11D7 Chevrolet Description
Each NOx sensor contains a sensing cell, a pumping cell, and a heater. A sample of exhaust gas passes through a diffusion gap between the sensing cell and the pumping cell. The NOx sensor maintains a constant reference voltage across the sensing cell. An electronic circuit within sensor controls the pump current through the pumping cell in order to maintain a constant voltage in the sensing cell. The amount of current required to maintain the reference voltage in the sensing cell is proportional to the concentration of NOx in the exhaust.
The ECM varies the amount of Diesel Exhaust Fluid (DEF) or reductant added by varying the reductant injector duty cycle in response to changes in engine exhaust out NOx levels.
The smart NOx sensors consist of two components, the NOx module and the NOx sensor element that are serviced as a unit. A circuit or performance condition with a NOx sensor is detected by the NOx sensor module. The smart NOx sensor module communicates the condition to the ECM over the serial data line. The ECM sets a DTC when a serial data message is received from the NOx sensor module.
What are the Possible Causes of the DTC P11D7 Chevrolet?
- Faulty Nitrogen Oxide (NOx) Sensor
- Nitrogen Oxide (NOx) Sensor harness is open or shorted
- Nitrogen Oxide (NOx) Sensor circuit poor electrical connection
How to Fix the DTC P11D7 Chevrolet?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P11D7 Chevrolet code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P11D7 Chevrolet code?
Need more information on how to fix the P11D7 Chevrolet code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P11D7 Chevrolet code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P11D7 Chevrolet Code
1. What are the common symptoms of a P11D7 OBDII code in a Chevrolet related to the Downstream NOx Sensor Self Diagnostic Bank 1 Sensor 2?
The common symptoms include poor engine performance, decreased fuel efficiency, and the illumination of the check engine light.
2. What are the possible causes of a P11D7 OBDII code in a Chevrolet?
Possible causes include a faulty downstream NOx sensor, issues with the exhaust system, wiring or connector problems, or an issue with the engine control module.
3. How serious is a P11D7 OBDII code in a Chevrolet?
While the vehicle may still be driveable with this code, it is important to address it promptly to prevent potential damage to the engine or emissions system.
4. How can I diagnose a P11D7 OBDII code in a Chevrolet?
Diagnosis typically involves using a scan tool to read the code, checking the downstream NOx sensor, inspecting the wiring and connectors, and verifying the exhaust system for any leaks or damage.
5. Can I drive my Chevrolet with a P11D7 OBDII code?
It is generally not recommended to drive the vehicle with this code present, as it can lead to decreased performance and potential long-term damage to the engine or emissions system.
6. How can I repair a P11D7 OBDII code in a Chevrolet?
Repair options may include replacing the downstream NOx sensor, repairing any wiring or connector issues, addressing exhaust system problems, or reprogramming the engine control module.
7. Is it possible to clear a P11D7 OBDII code in a Chevrolet without fixing the issue?
While you can clear the code temporarily, it is likely to return if the underlying problem is not addressed.
8. How much does it cost to repair a P11D7 OBDII code in a Chevrolet?
The cost of repair can vary depending on the specific issue causing the code, with potential expenses for parts and labor to consider.
9. Can a P11D7 OBDII code in a Chevrolet be prevented?
Regular maintenance, prompt repairs of any related issues, and proper driving habits can help prevent the occurrence of this code in your Chevrolet.
10. Will a P11D7 OBDII code in a Chevrolet affect emissions testing?
Yes, the presence of this code can cause your vehicle to fail emissions testing, so it is essential to address it before undergoing testing.
Discuss the causes and fixes for P11D7 Chevrolet OBDII Code
Code P11D7 Chevrolet comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
