AutoCodes – Chevrolet – P11D1 2014 Chevrolet Silverado

P11D1 2014 Chevrolet Silverado Code - O2 Signal Circuit Low Voltage (NOx Sensor 2)

Quick Answer

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. Common causes include Faulty Nitrogen Oxides (NOx) Sensor 2, Nitrogen Oxides Sensor 2 harness is open or shorted, Nitrogen Oxides Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P11D1 2014 Chevrolet Silverado indicates O2 Signal Circuit Low Voltage (NOx Sensor 2).
Common causes: Common causes include Faulty Nitrogen Oxides (NOx) Sensor 2, Nitrogen Oxides Sensor 2 harness is open or shorted, Nitrogen Oxides Sensor 2 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 253

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 24, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P11D1 2014 Chevrolet Silverado Description

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. There are two NOx sensors, one placed upstream of selective catalytic reduction, to measure inlet NOx concentration, and one placed downstream. They are connected with the control module via CAN and all the information is exchanged through it. Since it is a smart sensor, all the electrical monitoring is performed inside the sensor and only the results are sent to the Engine Control Module (ECM). Each NOx sensor contains a sensing cell, a pumping cell, and a heater. A sample of exhaust gas passes through a diffusion gap between the sensing cell and the pumping cell. The NOx sensor maintains a constant reference voltage across the sensing cell. An electronic circuit within the sensor controls the pump current through the pumping cell in order to maintain a constant voltage in the sensing cell. The amount of current required to maintain the reference voltage in the sensing cell is proportional to the concentration of NOx in the exhaust. The ECM varies the amount of diesel exhaust fluid (reductant) added by varying the reductant injector duty cycle in response to changes in engine exhaust NOx levels. The smart NOx sensors consist of two components, the NOx module and the NOx sensor element that are serviced as a unit. A circuit or performance condition with a NOx sensor is detected by the NOx sensor module. The smart NOx sensor module communicates the condition to the ECM over the serial data line. The ECM sets a DTC when a serial data message is received from the NOx sensor module. The Diagnostic Trouble Code (DTC) will be set if the ECM software detects a fault in the NOx sensor circuitry or a performance fault in the NOx sensor for greater than 2 s.

OBDII Code P11D1 2014 Chevrolet Silverado - O2 Signal Circuit Low Voltage (NOx Sensor 2) - AutoCodes.com — P11D1 2014 Chevrolet Silverado Code - O2 Signal Circuit Low Voltage (NOx Sensor 2)

What does this mean?

What are the Possible Causes of the DTC P11D1 2014 Chevrolet Silverado?

Faulty Nitrogen Oxides (NOx) Sensor 2
Nitrogen Oxides Sensor 2 harness is open or shorted
Nitrogen Oxides Sensor 2 circuit poor electrical connection

How to Fix the DTC P11D1 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P11D1 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P11D1 2014 Chevrolet Silverado code?

Need more information on how to fix the P11D1 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P11D1 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P11D1 2014 Chevrolet Silverado Code

1. What does the OBDII code P11D1 mean for a 2014 Chevrolet Silverado?

The P11D1 code indicates a low voltage issue in the O2 signal circuit for NOx Sensor 2, which monitors nitrogen oxide emissions in the exhaust system.

2. What are the common symptoms of a P11D1 code?

Symptoms may include an illuminated check engine light, decreased fuel efficiency, reduced engine performance, and possible difficulty passing emissions tests.

3. What causes the P11D1 code to appear?

Common causes include a malfunctioning NOx Sensor 2, damaged wiring or connectors in the sensor circuit, or issues with the engine control module (ECM).

4. Can I drive my 2014 Chevrolet Silverado with a P11D1 code?

While the truck may still be drivable, it is not recommended as it can lead to increased emissions, further engine issues, or damage to the catalytic converter if left unaddressed.

5. How do I diagnose the P11D1 code?

Diagnosis typically involves using a scan tool to verify the code, inspecting the NOx Sensor 2 and its wiring, and testing the sensorâ€™s voltage and resistance to confirm proper operation.

6. What is the role of NOx Sensor 2 in the exhaust system?

NOx Sensor 2 measures nitrogen oxide levels in the exhaust gas downstream of the catalytic converter to ensure emissions compliance and aid in engine management.

7. How much does it cost to fix a P11D1 code on a 2014 Chevrolet Silverado?

Repair costs can vary but generally range from $300 to $800, depending on whether the NOx sensor needs replacement or if additional wiring repairs are required.

8. Can a bad NOx sensor cause other engine problems?

Yes, a faulty NOx sensor can cause improper air-fuel mixture adjustments, leading to poor fuel economy, higher emissions, and potential damage to other components.

9. How do I reset the P11D1 code after repairs?

After addressing the root cause, use an OBDII scan tool to clear the code. If the issue is fully resolved, the code should not return.

10. What maintenance can prevent the P11D1 code from occurring?

Regularly inspect and maintain the exhaust system, including sensors and wiring, and address any check engine light issues promptly to avoid long-term damage.