AutoCodesChevrolet – P11D0 2015 Chevrolet Silverado

P11D0 2015 Chevrolet Silverado Code - O2 Signal Circuit (NOx Sensor 2)

Quick Answer

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. Common causes include Faulty Nitrogen Oxides (NOx) Sensor 2, Nitrogen Oxides Sensor 2 harness is open or shorted, Nitrogen Oxides Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P11D0 2015 Chevrolet Silverado indicates O2 Signal Circuit (NOx Sensor 2).
Common causes
Common causes include Faulty Nitrogen Oxides (NOx) Sensor 2, Nitrogen Oxides Sensor 2 harness is open or shorted, Nitrogen Oxides Sensor 2 circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 261
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Mar 24, 2024
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P11D0 2015 Chevrolet Silverado Description

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. There are two NOx sensors, one placed upstream of selective catalytic reduction, to measure inlet NOx concentration, and one placed downstream. They are connected with the control module via CAN and all the information is exchanged through it. Since it is a smart sensor, all the electrical monitoring is performed inside the sensor and only the results are sent to the Engine Control Module (ECM). Each NOx sensor contains a sensing cell, a pumping cell, and a heater. A sample of exhaust gas passes through a diffusion gap between the sensing cell and the pumping cell. The NOx sensor maintains a constant reference voltage across the sensing cell. An electronic circuit within the sensor controls the pump current through the pumping cell in order to maintain a constant voltage in the sensing cell. The amount of current required to maintain the reference voltage in the sensing cell is proportional to the concentration of NOx in the exhaust. The ECM varies the amount of diesel exhaust fluid (reductant) added by varying the reductant injector duty cycle in response to changes in engine exhaust NOx levels. The smart NOx sensors consist of two components, the NOx module and the NOx sensor element that are serviced as a unit. A circuit or performance condition with a NOx sensor is detected by the NOx sensor module. The smart NOx sensor module communicates the condition to the ECM over the serial data line. The ECM sets a DTC when a serial data message is received from the NOx sensor module. The Diagnostic Trouble Code (DTC) will be set if the ECM software detects a fault in the NOx sensor circuitry or a performance fault in the NOx sensor for greater than 2 s.
OBDII Code P11D0 2015 Chevrolet Silverado - O2 Signal Circuit (NOx Sensor 2) - AutoCodes.com
P11D0 2015 Chevrolet Silverado Code - O2 Signal Circuit (NOx Sensor 2)

What are the Possible Causes of the DTC P11D0 2015 Chevrolet Silverado?

  • Faulty Nitrogen Oxides (NOx) Sensor 2
  • Nitrogen Oxides Sensor 2 harness is open or shorted
  • Nitrogen Oxides Sensor 2 circuit poor electrical connection

How to Fix the DTC P11D0 2015 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P11D0 2015 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P11D0 2015 Chevrolet Silverado code?

Need more information on how to fix the P11D0 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P11D0 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P11D0 2015 Chevrolet Silverado Code

1. What does OBDII code P11D0 mean on a 2015 Chevrolet Silverado?

P11D0 refers to an issue with the O2 signal circuit for NOx Sensor 2, indicating a problem with the sensor's ability to properly communicate or monitor emissions.

2. What are the common symptoms of code P11D0 in a 2015 Chevrolet Silverado?

Symptoms may include a check engine light, reduced fuel efficiency, poor engine performance, or the vehicle failing an emissions test.

3. What causes code P11D0 to appear on a 2015 Chevrolet Silverado?

The code can be triggered by a faulty NOx Sensor 2, damaged wiring or connectors in the O2 signal circuit, exhaust leaks, or a malfunctioning ECM.

4. Can I drive my 2015 Chevrolet Silverado with code P11D0 active?

While the vehicle may still be drivable, driving with this code active can lead to reduced performance, higher emissions, and potential long-term damage to the emissions system.

5. How do I diagnose the P11D0 code on a 2015 Chevrolet Silverado?

Start by using an OBDII scanner to confirm the code, inspect the wiring and connectors for damage or corrosion, and test the NOx Sensor 2 functionality with a multimeter.

6. How do I fix code P11D0 on my 2015 Chevrolet Silverado?

Repairs may include replacing the NOx Sensor 2, repairing damaged wiring or connectors, addressing exhaust leaks, or reprogramming/updating the ECM.

7. How much does it cost to repair a P11D0 code on a 2015 Chevrolet Silverado?

Repair costs can vary, with NOx sensor replacement typically costing $300–$800, depending on labor rates and parts pricing.

8. Where is NOx Sensor 2 located on a 2015 Chevrolet Silverado?

NOx Sensor 2 is usually located downstream in the exhaust system, after the catalytic converter.

9. Could a bad catalytic converter cause code P11D0 on a 2015 Chevy Silverado?

Yes, a failing catalytic converter can lead to improper readings from the NOx sensor, potentially triggering the P11D0 code.

10. Do I need to clear the P11D0 code after repairs on my 2015 Chevrolet Silverado?

Yes, after completing repairs, clear the code with an OBDII scanner and take the vehicle for a test drive to ensure the issue has been resolved.

Discuss the causes and fixes for P11D0 2015 Chevrolet Silverado OBDII Code

Code P11D0 2015 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play