AutoCodes – Chevrolet – P11D0 2014 Chevrolet Silverado

P11D0 2014 Chevrolet Silverado Code - O2 Signal Circuit (NOx Sensor 2)

Quick Answer

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. Common causes include Faulty Nitrogen Oxides (NOx) Sensor 2, Nitrogen Oxides Sensor 2 harness is open or shorted, Nitrogen Oxides Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P11D0 2014 Chevrolet Silverado indicates O2 Signal Circuit (NOx Sensor 2).
Common causes
Common causes include Faulty Nitrogen Oxides (NOx) Sensor 2, Nitrogen Oxides Sensor 2 harness is open or shorted, Nitrogen Oxides Sensor 2 circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 407
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Mar 24, 2024
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P11D0 2014 Chevrolet Silverado Description

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. There are two NOx sensors, one placed upstream of selective catalytic reduction, to measure inlet NOx concentration, and one placed downstream. They are connected with the control module via CAN and all the information is exchanged through it. Since it is a smart sensor, all the electrical monitoring is performed inside the sensor and only the results are sent to the Engine Control Module (ECM). Each NOx sensor contains a sensing cell, a pumping cell, and a heater. A sample of exhaust gas passes through a diffusion gap between the sensing cell and the pumping cell. The NOx sensor maintains a constant reference voltage across the sensing cell. An electronic circuit within the sensor controls the pump current through the pumping cell in order to maintain a constant voltage in the sensing cell. The amount of current required to maintain the reference voltage in the sensing cell is proportional to the concentration of NOx in the exhaust. The ECM varies the amount of diesel exhaust fluid (reductant) added by varying the reductant injector duty cycle in response to changes in engine exhaust NOx levels. The smart NOx sensors consist of two components, the NOx module and the NOx sensor element that are serviced as a unit. A circuit or performance condition with a NOx sensor is detected by the NOx sensor module. The smart NOx sensor module communicates the condition to the ECM over the serial data line. The ECM sets a DTC when a serial data message is received from the NOx sensor module. The Diagnostic Trouble Code (DTC) will be set if the ECM software detects a fault in the NOx sensor circuitry or a performance fault in the NOx sensor for greater than 2 s.
OBDII Code P11D0 2014 Chevrolet Silverado - O2 Signal Circuit (NOx Sensor 2) - AutoCodes.com
P11D0 2014 Chevrolet Silverado Code - O2 Signal Circuit (NOx Sensor 2)

What are the Possible Causes of the DTC P11D0 2014 Chevrolet Silverado?

  • Faulty Nitrogen Oxides (NOx) Sensor 2
  • Nitrogen Oxides Sensor 2 harness is open or shorted
  • Nitrogen Oxides Sensor 2 circuit poor electrical connection

How to Fix the DTC P11D0 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P11D0 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P11D0 2014 Chevrolet Silverado code?

Need more information on how to fix the P11D0 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P11D0 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P11D0 2014 Chevrolet Silverado Code

1. What does the OBDII code P11D0 mean on a 2014 Chevrolet Silverado?

P11D0 indicates an issue with the oxygen (O2) signal circuit in NOx Sensor 2, which monitors nitrogen oxide emissions in the exhaust system.

2. What are the common symptoms of P11D0 on a 2014 Chevrolet Silverado?

Symptoms may include a check engine light, poor fuel efficiency, reduced engine performance, or emissions test failure.

3. What causes the P11D0 code to be triggered?

Common causes include a faulty NOx Sensor 2, damaged wiring or connectors in the O2 signal circuit, or exhaust system leaks.

4. Can a bad NOx sensor cause drivability issues?

Yes, a faulty NOx sensor can lead to poor engine performance, reduced power, and increased emissions.

5. How do I diagnose the P11D0 code on my 2014 Silverado?

Diagnosis typically involves scanning for codes, inspecting the NOx sensor and its wiring, and checking for exhaust leaks or corrosion.

6. How do I fix the P11D0 code on a 2014 Chevrolet Silverado?

Repairs may include replacing the faulty NOx Sensor 2, repairing damaged wiring or connectors, or addressing exhaust system issues.

7. Is it safe to drive with the P11D0 code?

While you can drive with the code temporarily, prolonged operation may result in reduced performance or damage to the catalytic converter.

8. How much does it cost to fix the P11D0 code on a 2014 Silverado?

Replacing a NOx sensor can cost between $300 and $1,000, depending on parts and labor costs.

9. Can I clear the P11D0 code without fixing the problem?

Clearing the code without addressing the underlying issue is not recommended, as the problem will likely return.

10. Does the P11D0 code affect emissions testing?

Yes, the P11D0 code can cause your vehicle to fail an emissions test due to improper readings from the NOx sensor.

Discuss the causes and fixes for P11D0 2014 Chevrolet Silverado OBDII Code

Code P11D0 2014 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play