AutoCodes – MINI – P11CF MINI

P11CF MINI Code - Throttle/Pedal Positio Sensor/Switch 'D' Circuit Voltage High

Quick Answer

The accelerator pedal position is monitored separately by 2 individual sensors. Common causes include Faulty Accelerator Pedal, Accelerator Pedal harness is open or shorted, Accelerator Pedal circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P11CF MINI indicates Throttle/Pedal Positio Sensor/Switch 'D' Circuit Voltage High.
Common causes: Common causes include Faulty Accelerator Pedal, Accelerator Pedal harness is open or shorted, Accelerator Pedal circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 776

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 15, 2020

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P11CF MINI Description

The accelerator pedal position is monitored separately by 2 individual sensors. Two sensors are employed to provide redundancy, implement the monitoring function, and facilitate recognition of malfunctions. The sensors register accelerator-pedal travel as angular deflection, with data being transmitted directly to the engine-management control unit as analog linear voltage curves for the pedal angle. Overall pedal travel is mechanically expressed as 16° ±0.5°.
Each change in the accelerator-pedal position is transmitted to the engine-management control unit with a maximum lag of 50 milliseconds. Sensor signals are transmitted in analog form. The engine-management control unit monitors the two input signals from the sensors and compares them for plausibility (factors such as mutual synchronicity, linearity, etc.).
The Digital Motor Electronics (DME) diagnosis the voltage at the Accelerator Pedal Module Pedal Sensor 1. The Diagnostic Trouble Code (DTC) is detected when the vehicle voltage is less than 10 volts. Limit value: 4.75 V.

OBDII Code P11CF MINI - Throttle/Pedal Positio Sensor/Switch 'D' Circuit Voltage High - AutoCodes.com — P11CF MINI Code - Throttle/Pedal Positio Sensor/Switch 'D' Circuit Voltage High

What does this mean?

What are the Possible Causes of the DTC P11CF MINI?

Faulty Accelerator Pedal
Accelerator Pedal harness is open or shorted
Accelerator Pedal circuit poor electrical connection
Faulty Accelerator Pedal Module

How to Fix the DTC P11CF MINI?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

BMW Diagnostic Trouble Code (DTC): 103004

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P11CF MINI code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P11CF MINI code?

Need more information on how to fix the P11CF MINI code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P11CF MINI code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P11CF MINI Code

1. What are the common symptoms of OBDII code P11CF in a MINI related to the Throttle/Pedal Position Sensor/Switch 'D' Circuit Voltage High?

- Common symptoms may include rough idling, reduced engine power, hesitation during acceleration, and the illumination of the Check Engine Light.

2. What are the possible causes of OBDII code P11CF in a MINI indicating Throttle/Pedal Position Sensor/Switch 'D' Circuit Voltage High?

- Possible causes may include a faulty throttle position sensor, issues with the pedal position sensor, wiring problems, or a malfunctioning electronic control module.

3. How can I diagnose the Throttle/Pedal Position Sensor/Switch 'D' Circuit Voltage High issue in my MINI?

- Diagnosing the issue may involve using an OBDII scanner to retrieve the specific fault code and then conducting a thorough inspection of the throttle and pedal position sensors, as well as the related wiring harnesses.

4. What are the potential risks of ignoring OBDII code P11CF related to the Throttle/Pedal Position Sensor/Switch 'D' Circuit Voltage High in a MINI?

- Ignoring this fault code may lead to poor engine performance, reduced fuel efficiency, and potential safety hazards if the vehicle experiences sudden loss of power while driving.

5. Is it safe to continue driving my MINI with OBDII code P11CF indicating Throttle/Pedal Position Sensor/Switch 'D' Circuit Voltage High?

- It is not recommended to continue driving the vehicle with this fault code present, as it can lead to further damage to engine components and potential safety issues on the road.

6. Are there any DIY repair tips for addressing OBDII code P11CF in a MINI due to Throttle/Pedal Position Sensor/Switch 'D' Circuit Voltage High?

- DIY repair tips may include checking and cleaning the sensor connectors, inspecting the wiring for any signs of damage, and resetting the fault code to see if it reoccurs after making these checks.

7. How much does it typically cost to repair OBDII code P11CF related to Throttle/Pedal Position Sensor/Switch 'D' Circuit Voltage High in a MINI?

- The cost of repair can vary depending on the specific cause of the issue, but it may involve replacing the faulty sensor or repairing/replacing damaged wiring, with costs ranging from a few hundred to over a thousand dollars.

8. Can a faulty Throttle/Pedal Position Sensor/Switch 'D' Circuit Voltage High issue in a MINI trigger other related fault codes?

- Yes, a faulty sensor or circuit issue can sometimes trigger other related fault codes, so it's important to address the root cause of the problem to prevent additional issues from arising.

9. How long does it typically take to repair OBDII code P11CF Throttle/Pedal Position Sensor/Switch 'D' Circuit Voltage High in a MINI?

- The repair time can vary depending on the extent of the issue and the availability of replacement parts, but it may take a few hours to a full day for a professional technician to diagnose and fix the problem.

10. Is it advisable to seek professional help for diagnosing and repairing OBDII code P11CF related to Throttle/Pedal Position Sensor/Switch 'D' Circuit Voltage High in a MINI?

- Yes, it is recommended to seek professional help from a certified mechanic or MINI specialist to accurately diagnose and repair the issue, ensuring that the problem is resolved effectively and safely.