P11CF BMW Code - Throttle/Pedal Positio Sensor/Switch 'D' Circuit Voltage High
Quick Answer
The accelerator pedal position is monitored separately by 2 individual sensors. Common causes include Faulty Accelerator Pedal, Accelerator Pedal harness is open or shorted, Accelerator Pedal circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P11CF BMW indicates Throttle/Pedal Positio Sensor/Switch 'D' Circuit Voltage High.
- Common causes
- Common causes include Faulty Accelerator Pedal, Accelerator Pedal harness is open or shorted, Accelerator Pedal circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P11CF BMW Description
Each change in the accelerator-pedal position is transmitted to the engine-management control unit with a maximum lag of 50 milliseconds. Sensor signals are transmitted in analog form. The engine-management control unit monitors the two input signals from the sensors and compares them for plausibility (factors such as mutual synchronicity, linearity, etc.).
The Digital Motor Electronics (DME) diagnosis the voltage at the Accelerator Pedal Module Pedal Sensor 1. The Diagnostic Trouble Code (DTC) is detected when the vehicle voltage is less than 10 volts. Limit value: 4.75 V.
What are the Possible Causes of the DTC P11CF BMW?
- Faulty Accelerator Pedal
- Accelerator Pedal harness is open or shorted
- Accelerator Pedal circuit poor electrical connection
- Faulty Accelerator Pedal Module
How to Fix the DTC P11CF BMW?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P11CF BMW code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P11CF BMW code?
Need more information on how to fix the P11CF BMW code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P11CF BMW code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P11CF BMW Code
1. What are the common symptoms of OBDII code P11CF on a BMW related to the Throttle/Pedal Position Sensor/Switch 'D' Circuit Voltage High?
- Common symptoms include reduced engine power, hesitation or surging during acceleration, and the illumination of the check engine light.
2. What are the possible causes of OBDII code P11CF on a BMW indicating a high voltage in the Throttle/Pedal Position Sensor/Switch 'D' Circuit?
- Potential causes may include a faulty throttle position sensor, a damaged wiring harness, poor electrical connections, or issues with the engine control module (ECM).
3. How can I diagnose OBDII code P11CF related to the Throttle/Pedal Position Sensor/Switch 'D' Circuit Voltage High on my BMW?
- To diagnose this code, you can use an OBDII scanner to retrieve the specific fault code, visually inspect the wiring and connectors, and perform voltage tests on the throttle position sensor.
4. Is it safe to continue driving my BMW with OBDII code P11CF indicating a high voltage in the Throttle/Pedal Position Sensor/Switch 'D' Circuit?
- It is not recommended to drive the vehicle with this code present, as it can lead to poor engine performance and potential safety hazards. It's best to address the issue promptly.
5. How can I reset OBDII code P11CF on a BMW related to the Throttle/Pedal Position Sensor/Switch 'D' Circuit Voltage High?
- Resetting the code can be done with an OBDII scanner by clearing the fault codes after addressing the underlying issue causing the high voltage in the throttle position sensor circuit.
6. Can a DIY enthusiast repair OBDII code P11CF on a BMW by themselves?
- Depending on the exact cause, DIY repairs may be possible, such as replacing a faulty throttle position sensor or repairing a damaged wiring harness. However, complex issues may require professional assistance.
7. What are some tips to prevent OBDII code P11CF from recurring on a BMW after repair?
- To prevent code recurrence, ensure proper installation of new components, perform regular maintenance checks on the throttle system, and address any underlying issues that may cause high voltage in the circuit.
8. How much does it typically cost to repair OBDII code P11CF on a BMW related to the Throttle/Pedal Position Sensor/Switch 'D' Circuit Voltage High?
- Repair costs can vary depending on the exact cause of the issue, but expenses may include the cost of parts (e.g., throttle position sensor) and labor charges from a mechanic or dealership.
9. Are there any recalls or technical service bulletins (TSBs) related to OBDII code P11CF in BMW vehicles?
- It's recommended to check with BMW dealership or the manufacturer's website for any recalls or TSBs related to OBDII code P11CF to see if there are known issues or remedies provided.
10. Can a faulty accelerator pedal position sensor cause OBDII code P11CF in a BMW?
- Yes, a faulty accelerator pedal position sensor can contribute to OBDII code P11CF, as it is part of the throttle system that affects the voltage levels in the circuit.
Discuss the causes and fixes for P11CF BMW OBDII Code
Code P11CF BMW comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
